Automatic cleaning system highway transportation tank car

The STD series automatic cleaning system is suitable for cleaning tank car that transport dangerous chemical products; tank trucks are loaded with chemical media such as BDO, RNMP, animal oil, tallow, vegetable oil, alcohols, ethers, organic solvents, acids, alkalis, etc. This system is suitable for a series of operations such as automatic degreasing cleaning, hot water cleaning, normal temperature water cleaning, drying, and testing of 20-48m tank trucks.

Working principle:

This equipment is used for internal cleaning of tank trucks. The equipment working mode is fully automatic program control. According to the cleaning environment and tank conditions, the camera and light source are assisted; the manhole position is automatically determined, and the cleaning head automatically moves in the direction to clean each compartment one by one; after the cleaning is completed, the hot air system of the hot air blower is used for drying; the camera transmits the cleaning video inside the tank, and the manual terminal observes and inspects the tank. No one goes down the tank throughout the process, and a series of automated processes such as residual oil discharge, tank steaming, cleaning, sewage recovery, drying, and testing of the entire oil tank are completed. The cleaning operation is carried out according to the assembly line, and the tank body is cleaned synchronously in sequence (including extraction of residual liquid, steaming tank, cleaning, drying, testing, etc.), which improves the cleaning quality and cleaning speed.

Product features and advantages：

1. The safety protection measures during mechanical cleaning are perfect to eliminate the safety threats caused by entering the tank;

2. The mechanical cleaning system is fully enclosed, with a high degree of mechanization and less manpower, avoiding long-term work in harsh environments;

3. The mechanical cleaning time is short, the tank mouth time is less, and the tank stop time is reduced;

4. The circulating water is separated from oil and water, and it can be discharged only when it reaches the standard value. The cleaning effect is good and the crude oil recovery rate is high;

5. Mechanical cleaning does not discharge oil pollution outside the oil tank. The recovered crude oil is transferred to the critical tank after filtration. The generated sewage is treated by the oil-water separation device, the residual oil is recovered, and the sewage and dirt are treated to the discharge standard value before being discharged.

Other supplier products

	Fastness to Washing Tester-QINSUN	The two separated cylinders equip with independent control panels respectively, able to conduct the two tests with different temperature independen...
	Civil Aviation Aircraft Interior Non-metallic Materials Flame Retardant Property Tester	Compliance Standards FAR25.853 (FAA Airworthiness Standards for Transport Category Aircraft) CCAR-25-R4.853 (Chinese Civil Aviation Regulations A...
	Automotive Seat Belt Buckle Bending Test Machine	Standard ISO 10195(Seat Belt Anchorage Hardware - Test Methods) ECE R16(Uniform Provisions Concerning the Approval of Safety Belts and Restrain...
	Automatic thermal deformation Vica softening point tester	Product Introduction: 1. Name: Thermal deformation, Vica softening point temperature tester 2. Model :G-1 3. Product introduction: thermal defor...
	Automobile Headrest Strength Tester-QINSUN	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test methods" : This standard specifies the static streng...

供应产品

Same products

	Seat Bumping and Creep Test Bench	卖方: Standard International Group (HK) Limited	This test bench is used for simulating the car seat bumping and creep situation when a car is run...
	Automobile seat belt fixed point test bench	卖方: Standard International Group (HK) Limited	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur...
	Impact strength tester for car seat headrest	卖方: Standard International Group (HK) Limited	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi...
	Impact strength tester for car seat launching headrest	卖方: Standard International Group (HK) Limited	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w...
	Automobile Headrest Strength Tester	卖方: Standard International Group (HK) Limited	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me...