Automatic cleaning system highway transportation tank car

• 

The STD series automatic cleaning system is suitable for cleaning tank car that transport dangerous chemical products; tank trucks are loaded with chemical media such as BDO, RNMP, animal oil, tallow, vegetable oil, alcohols, ethers, organic solvents, acids, alkalis, etc. This system is suitable for a series of operations such as automatic degreasing cleaning, hot water cleaning, normal temperature water cleaning, drying, and testing of 20-48m tank trucks.

Working principle:

This equipment is used for internal cleaning of tank trucks. The equipment working mode is fully automatic program control. According to the cleaning environment and tank conditions, the camera and light source are assisted; the manhole position is automatically determined, and the cleaning head automatically moves in the direction to clean each compartment one by one; after the cleaning is completed, the hot air system of the hot air blower is used for drying; the camera transmits the cleaning video inside the tank, and the manual terminal observes and inspects the tank. No one goes down the tank throughout the process, and a series of automated processes such as residual oil discharge, tank steaming, cleaning, sewage recovery, drying, and testing of the entire oil tank are completed. The cleaning operation is carried out according to the assembly line, and the tank body is cleaned synchronously in sequence (including extraction of residual liquid, steaming tank, cleaning, drying, testing, etc.), which improves the cleaning quality and cleaning speed.

Product features and advantages：

1. The safety protection measures during mechanical cleaning are perfect to eliminate the safety threats caused by entering the tank;

2. The mechanical cleaning system is fully enclosed, with a high degree of mechanization and less manpower, avoiding long-term work in harsh environments;

3. The mechanical cleaning time is short, the tank mouth time is less, and the tank stop time is reduced;

4. The circulating water is separated from oil and water, and it can be discharged only when it reaches the standard value. The cleaning effect is good and the crude oil recovery rate is high;

5. Mechanical cleaning does not discharge oil pollution outside the oil tank. The recovered crude oil is transferred to the critical tank after filtration. The generated sewage is treated by the oil-water separation device, the residual oil is recovered, and the sewage and dirt are treated to the discharge standard value before being discharged.

Other supplier products

	Yarn Loop Length Tester	Compliance Standards FZ/T 70001-2003. FZ/T 71004-2003 Scope of Application Determines loop length of various yarns and knitted loops. Verifies c...
	Multi-Functional Scratch Tester	Introduction Multi-Functional Scratch Testeris suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, ...
	Fabric Anti-Electromagnetic Radiation Performance Tester	Standards GB/T23326. GB/T25471. ASTM D4935. SJ2054 Application It is used for testing the electromagnetic shielding effectiveness of electromagn...
	Industrial water purifier	Applicable Standards Industrial water purifier systems adhere to global purity and safety benchmarks, including: ASTM D1193(Specifications fo...
	Leakage trace tester	I. Product Overview TheLeakage Trace Testeris a precision diagnostic tool designed to visually identify and analyze fluid/gas leakage paths in sea...

Same products

	Seat Bumping and Creep Test Bench	Seller: Standard International Group (HK) Limited	This test bench is used for simulating the car seat bumping and creep situation when a car is run...
	Automobile seat belt fixed point test bench	Seller: Standard International Group (HK) Limited	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur...
	Impact strength tester for car seat headrest	Seller: Standard International Group (HK) Limited	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi...
	Impact strength tester for car seat launching headrest	Seller: Standard International Group (HK) Limited	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w...
	Automobile Headrest Strength Tester	Seller: Standard International Group (HK) Limited	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me...