Rotating tank cleaning spray nozzle
STDhigh impact rotating tank cleaning nozzle，chemical tank cleaning equipment
Technical data：
| Manufacturing materials： | 316L SS | Lubrication： | Self lubrication by cleaning fluid |
| Working pressure： | 3-10bar | Recommended pressure： | 4-7bar |
| Maximum operating temperature： | 95°C | Maximum ambient temperature： | 140℃ |
| Cleaning angle： | 360°full coverage | Cleaning diameter： | 5m |
| Cleaning cycle： | 4-8minute | Water inlet： | 3/4“FR BSSPfemale，1”BSPP female |
| Tank opening： | 100mm | Technical highlights： | Design of independent reducer |
| Customizable： | Explosion proof, high temperature, oil resistant | Weight： |
Feature:
Driven by cleaning fluid, where the ball of the unit rotates at a slow speed, ensuring effective impingement of the cleaning solution onthe interior walls.KC5 tank cleaning nozzle offer improved cleaning over traditional rotary spray nozzle
High impact flat jet, 360 degree spray, thoroughly clean
Internal gear reduction make it work more stable
Application:
STD rotary tank cleaning nozzles are well suited for small to medium sized tanks, such as dairy , food, pharmaceutical, beer, chemical,industrial fermentation industry and the need for high impact cleaning occasions.
在线联系供应商
Other supplier products
 |
Vertical Flammability Tester | IntroductionVertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwear, fabrics, other textile materials o... |
 |
Roughness profiler | Product Introduction: The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measur... |
 |
Civil Aviation Aircraft Interior Non-metallic Materials Flame Retardant Property Tester | Compliance Standards FAR25.853 (FAA Airworthiness Standards for Transport Category Aircraft) CCAR-25-R4.853 (Chinese Civil Aviation Regulations A... |
 |
360 spray 3D rotary jet head for large tanks | High impact 3D rotary tank washer Model number:STD 20 3D rotary jet head Impeller is driven by cleaning fluid and drives internal reduction mecha... |
 |
Fabric ici pilling and snagging box-QINSUN | Standard GB/T 4802.3: China’s national standard for textile pilling resistance. BS EN ISO 12945-1: European standard for wool-based textile... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
