Rotating tank cleaning spray nozzle
STDhigh impact rotating tank cleaning nozzle，chemical tank cleaning equipment
Technical data：
| Manufacturing materials： | 316L SS | Lubrication： | Self lubrication by cleaning fluid |
| Working pressure： | 3-10bar | Recommended pressure： | 4-7bar |
| Maximum operating temperature： | 95°C | Maximum ambient temperature： | 140℃ |
| Cleaning angle： | 360°full coverage | Cleaning diameter： | 5m |
| Cleaning cycle： | 4-8minute | Water inlet： | 3/4“FR BSSPfemale，1”BSPP female |
| Tank opening： | 100mm | Technical highlights： | Design of independent reducer |
| Customizable： | Explosion proof, high temperature, oil resistant | Weight： |
Feature:
Driven by cleaning fluid, where the ball of the unit rotates at a slow speed, ensuring effective impingement of the cleaning solution onthe interior walls.KC5 tank cleaning nozzle offer improved cleaning over traditional rotary spray nozzle
High impact flat jet, 360 degree spray, thoroughly clean
Internal gear reduction make it work more stable
Application:
STD rotary tank cleaning nozzles are well suited for small to medium sized tanks, such as dairy , food, pharmaceutical, beer, chemical,industrial fermentation industry and the need for high impact cleaning occasions.
Send product request
Other supplier products
 |
Wire and cable smoke density tester | Product Introduction: STD AOTSI-NBS smoke density test chamber, also known as smoke dense bottom test chamber, the test method comes from the Nati... |
 |
SUGA GX75 7.5kW Xenon Weather Meter | Applicable Standards The GX75 meets stringent international standards, including: ISO 4892-2,ASTM G155,SAE J2527(automotive coatings) JIS K7... |
 |
Thermal Radiation Flooring Combustion Tester | Product Standards ISO 9239 - 1: Reaction to fire tests for floor coverings - Part 1: Determination of the burning behaviour of floor coverings usi... |
 |
(Ford) Automotive wire flexibility testing machine | Applicable standards: Engineering Specification-Ford Global Wire specificationPART NO. ES-AU5T-1A348-AA Scope of application: Suitable for wir... |
 |
Automobile wire corrugated pipe drag grinding machine | Standards: ISO 6722. QC/T730. JIS C 3046. JASO D 611. SAEJ1128-2005. JBT 8139.TBT 1484.1-2001 Part1. EN50305. EN50306and other standards Parame... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
