Voltage Drop Tester for Automotive Wire Connectors
The voltage drop tester for automotive wire connectors is suitable for measuring the voltage drop at similar connection interfaces such as the pins of non - rewirable plugs and the leads of connecting plugs, so as to judge the quality of the connection interfaces. It can also be used for testing the contact voltage drop of terminals in connectors and wire harnesses. It complies with the ISO 8092.1 - .4 series of standards and relevant standards such as QC/T417.1 - 417.5 - 2001 for automotive wire harness connectors.
Technical Features:
This instrument features adjustable high - current output, micro - voltage testing, and digital tube display.
Main Parameters:
1. Input voltage: AC220V + 10%, 50Hz
2. Working current (DC): 0 - 100A (optional values including 5A, 10A, 20A, 50A, 100A, 200A, 500A, 1000A) and can be adjusted arbitrarily 3. Current output mode: Constant current
4. Voltage drop range: 0 - 20V (with three voltmeters of different accuracies for 0 - 200mV / 0 - 2V / 0 - 20V). The display ranges are 0.01 - 199.99mV / 0.1 - 1999.9mV / 1 - 19999mV respectively
5. Power: 3200W, maximum output voltage: 32V
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
在线联系供应商
Other supplier products
 |
Cantilever Fabric Stiffness Tester | Standard ZB WO4003. GB/T18318. ASTM D 1388. IS09073-7. BS EN22313 Application Fabric Stiffness Tester, is a practical equipment to determine t... |
 |
Blanket Flammability Test Machine | Introduction Bed Blanket Flammability Tester is used to detect the flame retardant performance of the bed blanket fabric and the flame spread prop... |
 |
Multilayer geotextile single-layer thickness tester | Meet the standard GB/T17598-1998. GB/T 13761.1-2022, JTG E50-2006, IS09863-90 Scope of application The multi-layer sample is mechanically separa... |
 |
Automotive Bed Liner Strength Testing Machine | Standard ASTM D624(Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers) ISO 37(Rubber, Vulcan... |
 |
Footwear Dynamic Waterproof Tester | Product Introduction: It is used to test the dynamic waterproof performance of various finished shoes, and the number of times when no water enter... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
