Automotive Comfort Air Conditioning Dummy Test System
Applicable standards：
ISO related standards, such asISO 14505-2. which provide test methods and evaluation indicators for thermal comfort.
Berkeley Zhang evaluation model: This model is applicable to the physiological characteristics of Chinese human body, and evaluates human thermal sensation and comfort in the non-uniform and transient environment of automobiles.
Main parameters：
Dummy size:
The design is based on theChinese male 50th percentile human body sizeand characteristics to simulate the thermal comfort of the real human body.
Dummy material:
Usually lightweight and durable materials, such as fiberglass, are used to ensure that long-term use in high and low temperature and high humidity environments will not fade and rust.
Joint connection:
The dummy realizes joint connection in the neck, shoulder, elbow, wrist, waist, knee and ankle, and can realize flexible adjustment of various positions to simulate the sitting position and movement of the real human body.
Sensor configuration:
A number of sensors, such as temperature sensor, humidity sensor and heat radiation sensor, are configured on the surface of the dummy to measure the climatic environment parameters in the cabin.
Communication method:
Wireless or wired communication connections can be used between the dummy and the master controller to achieve real-time data transmission and monitoring.
Main controller functions:
Each master controller can support multiple sets of dummies to carry out the test simultaneously, improving the test efficiency.
Data can be displayed, stored and historical data queried in the form of alphanumeric, y-t charts and 3D cloud images, and exported locally in CSV format.
Range of test parameters:
Air temperature:The measurement range is usually between -20°C and +70°C, with calibration accuracy of ±1.0°C and display accuracy of ±0.1°C.
Air flow rate:The measurement range is usually between 0.1 and 5.0 m/s.
Relative humidity: The measurement range is usually between 0 and 95%RH (non-condensing)。
Radiant heat:The measurement range of the radiation sensor is near zero to >2.000 W/m².
Thermal comfort evaluation index:
The system supports a variety of thermal comfort evaluation indicators, such as PMV-PPD, EHT based on ISO 14505-2. local and global thermal sensation and thermal comfort based on Berkeley-Zhang theory, etc.
在线联系供应商
Other supplier products
 |
EN sole bending tester | Product Introduction: The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect it... |
 |
Wyzenbeek or Oscillatory Abrasion Tester | Product introduction: Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of f... |
 |
Thermal Protective Performance Tester (TPP) | The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through... |
 |
Motorized Notching Machine | Product Introduction: Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughne... |
 |
Fully Automatic Vision Measuring Machine | Standards： JJF 1318-2011 Product advantages: 1. full mouse, handle type automatic control, simple to use, high efficiency, good stability 2. ca... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
