Plastic Injection Molding

Packson's injection molding machines range in capacity from 60-800T, providing a wide range of options for our clients. Our facility includes 40 sets of injection machines, with 9 NISSEI and 14 LSR machines housed in a class 8 clean room to ensure the highest level of cleanliness and quality. the remaining injection molding machines at our facility are located in the white room, which is also a controlled environment. These machines include both NISSEI and HAITAI brands, providing a diverse range of options for our clients.

All of our injection molding machines are equipped with 3-Axis robotic arms, which help to increase efficiency and reduce labor costs. These robotic arms can perform a variety of tasks, such as part removal, sorting, and assembly, allowing our team to focus on other important aspects of the production process.

Our production capabilities include short run and long-term molding for a variety of industries, including Medical Healthcare, Electronics, Aviation, and toy manufacturing. We specialize in two-shot and insert molding, which allows us to create complex parts with multiple materials or components. Our team utilizes the scientific molding process to ensure that our products meet the highest standards of quality and consistency.

In addition to molding, we offer a range of secondary processing services to meet our clients' diverse needs. These services include Ultrasonic Welding, Silk Screen Printing, Hot-Melting, and Assembly. Our team is experienced in these processes and can provide high-quality results quickly and efficiently.

Plastic Injection Molding Details and Options

Packson Injection Molding Capabilities
	Prototyping	On-Demand Production
Lead time	Make your mind in real in 10-25 days; including 24-hour quote responses with design-for-manufacturing (DFM) feedback	Make your mind in real in 20-40 days; including 24-hour quote responses with design-for-manufacturing (DFM) feedback
How to Choose	Complete design or equipment iterations and evaluate cost or manufacturing compromises.	The design and configuration are finalized and the aim is to supply chain risks, quality and TCO.
	The primary objective is to reduce design risks, enhance R&D productivity and accelerate product commercialization.	Consistency in production parts is critical.
	Typical Volume: Less than 5,000.	Requiring inspection files and information on casting ability.
Mold Cavities	Single & family molds	Single, multi-cavity, and family molds;
Machines Available	10-1000 press tonnage
Inspection and Certification Options	ISO9001,ISO13485,ISO 7&8 Medical Clean Room Molding
Mold Life	Less than 5000 shots	Unlimted
The Tolerances in the Steel	Achieve the tightest tolerance ±0.005mm/0.002inch
The Tolerances in the part	Achieve the tightest tolerance ±0.01mm/0.004inch
Inspection Documentation	Critical-to-Quality First Article Inspection
	Critical-to-Quality 30-part capability study
	Critical-to-Quality dimensions checked during all runs
	Scientific molding process validation report
	CMM measurement technology
Other Options	Consultative Design and Tool Services for free
	Final Finishing Options
	No MOQ
	Quick-turn shipping in as fast as 1 day

Make Possible With Packson - Your Professional Plastic Injection Molding

Equipped with 10,000 square foot plastic injection molding factoryand facility, Packson plastic injection molding company is located in Dongguan, Guangdong. We build all kinds of molds from easy prototyping to full production molds like multi-cavity,2K mold, liquid silicone rubber mold, inserting mold, and our molding press up to 1,000 tons. Packson plastic injection molding in chinacompany uses world-leading equipment including CAD/CAM, high-speed CNC machines, wire-cut EDMs imported from Switzerland, milling machines, drill machines also grinders. Our experienced team of engineering, plastic injection molding makers are able to work together to build good molds for the production molding part. What kind of part do you need to make? No matter what, you can count on Packson injection molding company in chinaand we will help you convert your idea into reality by our professional teams.

Apart from good teams of plastic mould manufacturers in china, the following points are also very important for us to be a good plastic injection molding manufacturer:

Equipped with ISO class 8 Clean Room

Scientific Injection Molding Technology

Well-developed QC system

7 Steps In Plastic Injection Molding Service

7 Steps in the plastic injection molding process cycle:

Filling material into the barrel

Plastic resin is supplied in raw granules. They are dried to the correct water content, and then if needed, they can be mixed with coloring masterbatches or pigments.

Melt and Mix material

The dried granules are placed in the feed hole of the molding machine. An alternative screw inside the machine barrel will carry these materials to the mold while

heating them.

Closes Mold

Every half of the mold is fixed to the injection molding machine. A half is permitted to be moved. The hydraulic clamping unit pushed the mold halves together and exerts enough force to hold the mold tightly shut while the granules are injected. These two partial mould will be pushed together by the hydraulic system in order to hold the mold tightly shut while the granules are injected. The time it takes to close and tighten the mold depends on the machine-large clamping forces) will take longer.

Inject the plastic into the cavity of the mold

The injection molding pushed raw material into a mold. In this process, the melted plastic is then injected into the mold very rapidly and the pressure packs build up and hold the material. The injection time is hard to calculate precisely because of the complex and changing flow of melted plastic in the mold. But it can be estimated depending on the volume injected, the pressure, and power.

Cooling melted material in the cavity.

The melted plastic inside the mold starts to cool when it touches with inside surfaces of the mold. While the plastic cools, it will freeze in the shape of the required part. But there may be some appear sink marks on the part in the cooling. Packing the material at the injection enables an extra material to drain into the mold and reduce the amount of visible shrinkage. The mold can't be opened unless the necessary cooling time has passed.

Open mold

These two halves of mold will be split by a hydraulic system as well.

Ejection

Once the time has elapsed, the cooled part can be ejected from the mold through the ejection system which is fixed to the back half of the mold. Once the mold is opened, the part will be pushed out by the mechanism. The force must be suited to eject the part as when cooling, the workpiece shrinks and adheres to the mold.

Plastic injection Molding Application

Certifications

-Packson plastic injection molding company cercitified with ISO9001, ISO13485 and equipped with ISO 8 medical cleanroom molding.

Rapid Prototye

-Rapid processing mold with low cost and enable to make plastic injection molding products with 10 days at a competitive price.

Molding Parts

-Moulded part is a good way for low quantity production from dozen to hundred of the part even millions of parts. The molding part is better than the part machined by CNC or 3D printing with the same material. The right choice for resin used in the molding part allows for a wide range of properties. Mold is essential for plastic injection molding medical plastic parts. So molds machined by CNC and Wire cut EDM with high precision and tolerance are enable make thousands of parts.

Other supplier products

	Plastic Injection Molding	Packson's injection molding machines range in capacity from 60-800T, providing a wide range of options for our clients. Our facility includes 40 se...
	Multi-cavities Injection Molding	Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce...
	Clean Room Injection	Packson - Medial Injection Moulding Cleanroom Expert Packson specializes in delivering top-notch clean room manufacturing and assembly solutions ta...
	Overmolding Injection Molding	Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials i...
	Silicone Rubber Injection Molding	Packson's state-of-the-art facilities consist of a 1000㎡ certified clean room, which is equipped with 14 sets of Liquid Silicone Rubber (LSR) injec...

供应产品

Same products

	Plastic Injection Molding	卖方: Packson Mold Co.,Ltd	Packson's injection molding machines range in capacity from 60-800T, providing a wide range of op...
	Iohexol Injection	卖方: 北京北陆药业股份有限公司	Iohexol oralis one of the different types of contrast media. Compared with a traditional ionic Co...
	注塑模具和吹塑模具现货出售和订购	卖方: JHMOULD	我们是中国的模具制造商和供应商，我们公司位于中国。 我们为各种应用制造模具。 我们有与俄罗斯客户和独联体国家客户合作的经验。 如果您对模具有需求，请联系我们。
	PMMA Acrylic Sheet	卖方: Willies De Scrap Inc	Are you looking for PMMA Acrylic or any other type of scraps and then you are welcome to our comp...
	disposable Twist lancets making machine DV-2100.2R.CE	卖方: Hangzhou Denice Machinery Co.,Ltd	All models of are manufactured in strict accordance with the EU machinery industry standards, f...