Jetty inflatable floating yokohama type pneumatic rubber fender
Florescence is a leading manufacturer for ISO 17357 pneumatic rubber fender/pneumatic fender/boat fenders, a leading anti-collision device for marine application in the world today. These compressed air fenders serve as protective medium against collision during ship-to-ship contact (STS) and ship-to-berthing (STB). Pneumatic fenders cn be delivered in various sizes and types. Chain and tyre net type is usually recommened to protect the fender body, but sling type or body only is also available.
Florescence Pneumatic Rubber Fender are exported to many countries like Vietnam, America, Denmark, Finland, Indonesia, Singapore, Philippines, France and more. High product quality and reasonable costing drives their adoption in the global market and are increasingly preferred as the most popular replacement to Yokohama fenders.
Pneumatic Rubber Fenders are made of an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.
1.The outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
2.The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
3.The inner rubber layer seals the pressurized air inside the fender.
4.Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
Fender assembly for the end of metal, by inside and outside the two flanges with bolts, nut clamping, center is a valve, its structure is similar to automobile tire valve.
Advantages of pneumatic rubber fender
1 High energy absorption with a low reation
2 Heavy duty and long service life over 10 years
3 Supplied as sling type or with chain and tire net for protection of the fender body
4 Light weight, portable and floatable, can be installed and replaced easily
5 Suitable for locations with large and small tidal differences
Pneumatic rubber fender use matters needing attention
1. Pneumatic pressure control in±5% of the rated pressure
2. Test pressure normally, add pressure in a timely manner
3. Avoid contact with sharp objects
4. When Long time not need, should wash to dry, filled with right amount of compressed air, placed in a cool dry ventilated place.
5. Storage place away from heat, acid and alkali, oil and grease
6. When store, shall not be folded and piled up
Applications of Pneumatic Rubber Fender
1. Ship to ship,ship to wharf 2. Oil tankers, container vessels
3. Luxury yachts, ocean platforms 4. Larges shipyards
5. Fender system 6. Military ports ,warship
7. Larger under water foundations of bridge
Qingdao Florescence Rubber Products Co.,Ltdis a comprehensive marine supply enterprise, intergrating the scientific research design, product development with technical services. We specialize in manufacturing pneumatic rubber fenders, foam fenders, various marine rubber fenders and ship lauching & salvage rubber airbags. FLORESCENCE products are designed, manufactured, and tested per ISO 17357 and ISO 9001:2002. And every unit is producted strictly according to the requirements of ship surveyors such as BV, CCS, etc.
Located in the Port of Qingdao FLORESCENCE can respond effectively to any urgent requirements of fenders and airbags with its comprehensive range of products.
Florescence has our own factory which manufacture rubber products for around 20 years, so we are the factory direct seller, we are more professional than other companies. FLORESCENCE Ship Salvage Fenders are exported to lots of countries, including Indonesia, Singapore, Kenya, Tanzania, etc. FlorescenceRuber Fender can be manufatured in various sizes and types according to the clients' requirements.
在线联系供应商
Other supplier products
 |
Pneumatic marine fender | Pneumatic marine fender Pneumatic marine fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable... |
 |
Yokohama fishing boat/tugboat/ship equipments and tools natural rubber fender | Peumatic Rubber Fendershave been in use for around 50 years.It is the leading anti-collision device for marine application in the world. The compre... |
 |
Heavy duty boat ship moving airbag for lifting salvage | Ship moving airbag Advantages of ship moving airbag 1.Qingdao Florescence specializes in the production of ship moving airbag sin... |
 |
Marine mooring 50KPA ship floating pneumatic rubber fender | Introduction ofMarine mooring 50KPA ship floating pneumatic rubber fender Ship floating pneumatic rubber fenders are ideal for permane... |
 |
Ship Launching Inflatable Marine Rubber Airbag To America | Launching airbag Application ofShip Launching Inflatable Marine Rubber Airbag To America ... |
Same products
 |
三维移动定位车造船合拢设备 | 卖方: 837294 | 北京中海时代科技有限公司是专业从事中外高科技产品的企业。 涉及领域有船舶、航海、工业、科研、通信、能源、交通等，主要客户方向：造船厂、修船厂、航运公司、船东、制造厂、科研所等企业。 公司... |
 |
Best Selling Products 2020 In Europe Amazon Freight Forwarder Logistic Fba Freight Shipping Cost China | 卖方: Haoocean International Logistics(Shanghai)Co.,Ltd. | shipping |
 |
50 ,026,60,4*0.32,14-69-107,16,40,70, 261.1112110-01,273.1112110-20 | 卖方: 泗洪唐尼发动机配件有限公司 | Our factory produce nozzle, plunger,injector,valve,etc,which used for the agricultural machinery ... |
 |
7×0,25×130,7×0,25×140,7×0,25×155,7×0,3×130,7×0,3×140,7×0,3×170,7×0,35×140 | 卖方: 泗洪唐尼发动机配件有限公司 | Contact person : Yolanda Mobile & 5×0.3×130,5×0.35×130,5×0.5&... |
 |
8x0,42x150 : 6CH 31/36 (D67) 8×0.3×140 | 卖方: 泗洪唐尼发动机配件有限公司 | Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult... |
