MN/300/100 fire alarm control panel Overview The MN300 is a new type of analog fire alarm control panel which has 100 alarm control points (detectors and modules which are characterized by fully mixed coding, non-polarity and two buses). It complies with the provisions of both Fire Alarm Control Units (GB4717-2005) and Automatic Control System for Fire Protection (GB. Features 1 The intelligent detectors and the intelligent modules have internal microprocessors to realize digital filtering and auto-compensation functions; the data collection is true and reliable; the MN300 control panel can carry out data processing based on fuzzy control theory and modern fire alarm theory to fundamentally avoid missing alarms and to reduce false alarms, so as to improve reliability. 2 The detectors have a sensitivity setup function and can adjust the alarm sensitivity according to the specific environment and their influences. 3 The detecting bus and the control bus share a two-wire structure and have non-polarity and fully mixed coding of the detectors and modules, and the intelligent detectors and the intelligent modules can be directly connected to them, which greatly simplifies the system wiring, engineering installation and circuit maintenance. 4 The system uses an AC-DC master-standby power supply system which will automatically change between the master and standby power supplies in the event of a power failure of either of the two power supplies to ensure uninterrupted operation of the system. 5 The MN300 can be connected to a special mini-printer to realize real-time printing. 6 The MN300 can be connected to floor fire display panels to display fire alarms by standard RS-485 7 The MN300 can be connected to ten multi-line linkage control/monitoring points to control and monitor important equipment.
8 The MN300 is equipped with eight bus manual control points, which makes it very easy for the user to control related equipment.
在线联系供应商
Other supplier products
火灾报警控制面板16区火灾探测与扑救 | 这火灾报警控制面板符合NFPA要求。应由适当合格的服务人员安装、委托和维修。 描述: 1。它有16个区域和4个发声器输出。 2。它有3种标准继电器的触点报警、故障、监控。它与远程延迟和EIA-485端口中继器面板通信。 三.它与传统的N O O接触输入设备,包括2线,4线烟雾探测器,热... | |
Safety Home Wireless Break Beam System anti theft | Active photoelectric infrared grating for window break in prevention. Detection distance within 10m outdoor intrusion detector. It is updated wirel... | |
Solar powered anti-masking, anti-interference Detector | Motion Sensor anti-mask and tamper-resistant outdoor intruder alarm.It used polycrystalline silicon solar cell as power for easy installation.Funct... | |
Home Alarm Systems | LCD display 32 wireless 8 wired PSTN network Ademco 4+2 contact id alarm systems. The control panel can report detailed alarm information such as a... | |
太阳能无线双向闪光灯和警报器 | 音频和视频报警装置md-324r太阳能无线报警系统 功能与规格: 1、可以与控制面板一起工作,也可以与遥控器一起工作,也可以独立使用无线探测器。 2、可编码48台无线设备。 3,它可以促进的声音时,面板或解除武装。 4、它是防篡改的。 5、它是用多晶硅太阳能电池供电的太阳能电池。 ... |
Same products
可寻址消防报警主机 | 卖方: 781388 | 可寻址消防报警主机具备火灾探测报警和自动灭火控制功能。两线制环形回路 1-6 路可配接200-1200 火灾探测感烟,感温,气体泄漏探测器和手动报警按钮。 | |
Fire alarm systems | 卖方: Vedard Security Alarm Systems Store online | ||
卖方: Vedard Alarm Security Technology | MN/300/100 fire alarm control panel Overview The MN300 is a new type of analog fire alarm control... | ||
火灾报警控制面板16区火灾探测与扑救 | 卖方: Vedard Alarm Security Technology | 这火灾报警控制面板符合NFPA要求。应由适当合格的服务人员安装、委托和维修。 描述: 1。它有16个区域和4个发声器输出。 2。它有3种标准继电器的触点报警、故障、监控。它与远程延迟和EI... | |
AW-AFP2189 Addressable Fire Alarm Control Panel | 卖方: Asenware | AW-AFP2189 Addressable Fire Alarm Control Panel Product Overview: AW-AFP2189 fire alarm control... |