MN/300/100 fire alarm control panel Overview The MN300 is a new type of analog fire alarm control panel which has 100 alarm control points (detectors and modules which are characterized by fully mixed coding, non-polarity and two buses). It complies with the provisions of both Fire Alarm Control Units (GB4717-2005) and Automatic Control System for Fire Protection (GB. Features 1 The intelligent detectors and the intelligent modules have internal microprocessors to realize digital filtering and auto-compensation functions; the data collection is true and reliable; the MN300 control panel can carry out data processing based on fuzzy control theory and modern fire alarm theory to fundamentally avoid missing alarms and to reduce false alarms, so as to improve reliability. 2 The detectors have a sensitivity setup function and can adjust the alarm sensitivity according to the specific environment and their influences. 3 The detecting bus and the control bus share a two-wire structure and have non-polarity and fully mixed coding of the detectors and modules, and the intelligent detectors and the intelligent modules can be directly connected to them, which greatly simplifies the system wiring, engineering installation and circuit maintenance. 4 The system uses an AC-DC master-standby power supply system which will automatically change between the master and standby power supplies in the event of a power failure of either of the two power supplies to ensure uninterrupted operation of the system. 5 The MN300 can be connected to a special mini-printer to realize real-time printing. 6 The MN300 can be connected to floor fire display panels to display fire alarms by standard RS-485 7 The MN300 can be connected to ten multi-line linkage control/monitoring points to control and monitor important equipment.
8 The MN300 is equipped with eight bus manual control points, which makes it very easy for the user to control related equipment.
Send product request
Other supplier products
 |
Smoke Detector 4-wire with relay output DC powered | 4-Wire Smoke Detector with Relay output DC powered YT-142 The detectors are photo-electronic detector uses a state of-the-art optical sensing chamb... |
 |
CO detector Carbon Monoxide Alarm AC or DC power NC NO output | Toxic gas detector and gas alarm of environment security sensor. CO303 AC power wire in or plug in type or CO343A DC9-28VDC power relay NC or NO ou... |
 |
Fire call point addressable fire alarm system emergency box | X X X |
 |
Gas detector with solenoid valve | X X X X X X X X |
 |
Solar powered anti-masking, anti-interference Detector | Motion Sensor anti-mask and tamper-resistant outdoor intruder alarm.It used polycrystalline silicon solar cell as power for easy installation.Funct... |
Same products
 |
Addressable fire alarm control panel | Seller: 781388 | 1 loop to 6 loop addressable fire alarm control panel. Each loop can actually equip up to 200 fi... |
 |
Fire alarm systems | Seller: Vedard Security Alarm Systems Store online | |
|
|
Seller: Vedard Alarm Security Technology | MN/300/100 fire alarm control panel Overview The MN300 is a new type of analog fire alarm control... | |
 |
Fire Alarm Control Panel 16 zones Fire Detection and Fire fighting | Seller: Vedard Alarm Security Technology | This fire alarm control panel meets NFPA requirement. It should be installed, commissioned and ma... |
 |
AW-AFP2189 Addressable Fire Alarm Control Panel | Seller: Asenware | AW-AFP2189 Addressable Fire Alarm Control Panel Product Overview: AW-AFP2189 fire alarm control... |
