Floor coverings flammability tester
Applications:
TheFlammability Test Chamberis used to test the effects of a small source of ignition on floor coverings. It can be used for either the hot metal nut test (BS 4790) or the methenamine tablet test (ISO 6925 and BS 6307).
Product Information:
The test chamber is manufactured from non-combustible heat resistant board with a counter weighted sliding panel for easy access. The mirror on top of the chamber allows the operator to view the specimens during the test.
Test Method:
The stainless steel nut is heated to a temperature of 900°C in a muffle furnace. The specimen is placed inside the test chamber and the clamping rig is placed onto the sample using crucible tongs supplied. The heated nut is placed in the centre of the clamping rig. After 30 seconds the nuts removed and the effects of the ignition allowed to subside.
Measurements are then made to assess the spread of the ignition on the sample. It is recommended that the test chamber is placed in a laboratory fume hood.
The conditioned specimens are placed on the removable base inside the test chamber and the metal plate with a circular cut-out is placed on the sample. The tablet is placed at the centre of the specimen and ignited. After the flame has extinguished, measurements are taken to assess the effects.
Features:
1. Complete with measuring grid and clamping ring;
2. Sliding panel for easy access;
3. Angled mirror for viewing;
4. Applicable to 2 different tests, enclosed unit for optimum;
5. Safety.
Other supplier products
|
|
Rubber hose outer coating wear testing machine |
Product Introduction:
Rubber hose outer coating Wear testing machine for hydraulic hoses and other similar types of hoses with fabric or steel wir... |
|
|
Metal Corrosivity Tester |
standards
GB/T 15970
ISO 7539
ASTM G31
GB/T 10125
Scope of Application
The metal corrosivity tester is designed and manufactured in line with... |
|
|
Fiber crimp elastometer |
Product Introduction:
YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber.
Crimp elasticity, crimp recovery rate index... |
|
|
Full Notch Creep Tester |
Standard
ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress.
ASTM D2990: Configurable f... |
|
|
Bearing Friction Torque Measuring Instrument |
Standards
GB/T 32562-2016
JJF1137-2024
Main Purposes
The bearing friction torque tester is a precision instrument specifically designed for mea... |
供应产品
Same products
