Water-cooled Light & Weather Fastness Tester -QINSUN SI 4000
SI4000 water cooled sunlight fastness tester -The color and properties change of textile dyes can be tested by using argon arc lamp to simulate and control the most ideal natural climate and daylight experiment conditions. The aging resistance of materials can also be tested, and the service life of products can be accurately tested on the basis of good repeatability and reproducibility.
Introduction
Standards compliant
AATCC TM16.3 Colorfastness to Light: Xenon-Arc
AATCC TM169 Weather Resistance of Textiles: Xenon Lamp Exposure
AATCC TM16E Colorfastness to Light
ASTM C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C1442 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
ASTM C793 Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
ASTM D1148 Standard Test Method for Rubber Deterioration?Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
ASTM D1670 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM D2565 Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
ASTM D3424 Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
ASTM D3451 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D4101 Standard Specification for Polypropylene Injection and Extrusion Materials
ASTM D4303 Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints
ASTM D4355 Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
ASTM D4434 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
ASTM D4459 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
ASTM D4637 Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane
Major Features
Intelligent touch screen control panel
Microcomputer control system, more efficient and more reliable, programmable 7 inch color LCD touch screen, control, detection, calculation, data display and other functions.
powerful software function
Enhanced control system can handle complex custom procedures and simple pre-programming test, simple operation page icon is clear and easy to understand;Irradiance, temperature and humidity are adjustable.
Multidirectional protection design
Instrument with irradiance monitoring, lamp power monitoring, water quality monitoring, temperature monitoring, water level to limit, lack of protection, water flow monitoring, dry burning protection, leakage protection
large test area
Imported xenon lamp, new water-cooled xenon lamp cooling system, good cooling effect, low cooling water consumption, large experimental box, can test up to 65 samples at a time, the sample rack can be rotated, improve the exposure consistency of all
Irradiance closed-loop monitoring and automatic regulation
The instrument can meet a variety of band light source testing, can be regularly through the irradiance calibration device automatic calibration, irradiance calibration device through the certification of the authority of the metering institutions.
Field Application
SI4000 water cooled sunlight fastness tester is widely used in plastics, paint coating, ink, packaging, automotive materials, photochemical materials, pigment dyes and textiles and other industries.
It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.
Technical Parameters
|
Operation mode: automatic The oblique angle of sample rack :28±2angle the roatate speed of sample rack : 1RPM/adjustable |
The full diameter of sample rack : 648±6mm The minor diameter of sample rack :511±6mm |
|
Service lift(1 solar standard): 1200H |
pressure: 38-345kPa (20-50psi) |
|
filter:internal and external filters can be replaceable Irradiance control:340/420 or300-400nm select single point automatic control, optional second point monitoring |
Humidification:deionized water0.12l/min |
|
Box temperature:25-100 C |
Sample spray: deionized water0.07l/min |
|
Relative humidity control:automatic |
Sample rack spray:deionized water 0.07l/min |
|
Humidity range :lightcycle:10-75%, dark cycle10-100% |
Light source:6500W water-cooled xenon arc lamp HVAC-MJ/h (BTU/h)(max): |
|
Temperature control:automatic |
|
|
blackboard and black label temperature: BPT 40-110C / BST40-120 C |
Power:380V/220V 50Hz |
|
At the same control BPT or BST and the box tem perature:standardBPT/BST |
weight:550kg |
|
specimen frame type:three layer |
Dimension : 1500mmX1400mmX2200mm |
Our xenon lamp weathering machine can use Atlas ci4000 lamp tubes, which have the same performance and spectral range as Atlas xenon lamp weathering machines, and meet all the testing standards of Atlas similar models. It is the most perfect alternative to Atlas xenon lamp weathering machines. At the same time, the company provides complete machine installation and after-sales service.
Our xenon lamp weathering tester can replace the Atlas CI4000 xenon lamp weathering tester of the same model. It can be installed with the original Atlas lamp tube, and the spectrum and performance are exactly the same as the Atlas xenon lamp weathering tester, making it a perfect replacement for the Atlas xenon lamp weathering tester.
在线联系供应商
Other supplier products
 |
Full Notch Creep Tester / Full Notch Creep Test FNCT | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f... |
 |
Shank Flexural Strength Tester | Footwear Testing Machine | Shoe Shank Stiffness Tester | Product Introduction: The electric hook core anti-bending performance tester is used to test the anti-bending performance of the steel hook core. ... |
 |
DSC Differential Scanning Calorimeter / Differential Scanning Calorimeters | The Differential Scanning Calorimeter (DSC) measures the heat flow to or from a sample under controlled heating conditions. A small amount of sampl... |
 |
Bentonite waterproof blanket permeability tester丨Geotextile Test Machine | Scope of application: Used to determine the permeability coefficient of bentonite waterproof blanket under specified pressure and time conditions.... |
 |
Rubber Resilience Tester | Rubber Tester | Standard Complies withISO 4662:1986(international),JIS K6255(Japan), andGB/T 1681(China) standards for standardized resilience testing of vulcaniz... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | 卖方: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | 卖方: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | 卖方: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | 卖方: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | 卖方: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
