Automotive Wires Flammability Tester
Standards
FMVSS 302(Federal Motor Vehicle Safety Standard)
ISO 6722(Road Vehicle Cable Flammability)
UL 94(Tests for Flammability of Plastic Materials)
LV 214-2(Mercedes-Benz Flame Retardancy Spec)
SAE J1128(Low Voltage Battery Cable)
Technical Parameters
| Parameter | Specification |
|---|---|
| Flame Height | 20-175mm (±1mm) |
| Flame Temp | 950°C (±10°C) |
| Burn Duration | 0-999s (±0.1s) |
| Sample Size | 356×100mm (Max) |
| Gas Type | Methane/Propane (≥98% purity) |
| Burn Rate Accuracy | ±0.1mm/s |
Key Features
Vertical/horizontal flame chamber
Automatic flame application/retraction
Real-time temperature mapping
Smoke density measurement (0-100% obscuration)
Self-extinguishing time calculation
Test Capabilities
| Test Method | Standard | Parameters |
|---|---|---|
| Horizontal Burn | FMVSS 302 | 100mm/min flame spread |
| Vertical Burn | UL 94 V-0/V-1/V-2 | 10s flame application |
| Glow Wire | IEC 60695 | 550-960°C test temps |
Measurement System
High-speed IR thermography (1000Hz)
Laser smoke particle counter
Microsecond-resolution timers
Standard Configuration
Stainless steel test chamber (500×500×500mm)
Adjustable specimen holder
Precision gas flow control (0-10L/min)
FlameTest Pro analysis software
Automotive Options
EV battery fire simulation module
Toxic gas analyzer (HCN, CO, NOx)
High-voltage arc tracking detector
3D flame propagation analysis
Safety Systems
Automatic gas shutoff valve
Explosion-proof fume extraction
Emergency purge system
Thermal overload protection
Test Protocol Example (FMVSS 302)
Precondition sample @23°C/50% RH for 24h
Mount specimen horizontally in holder
Apply 38mm flame for 15s
Measure burn rate between 25-150mm marks
Calculate maximum spread rate ≤100mm/min
在线联系供应商
Other supplier products
 |
High - voltage DC Stability Tester | Standard Engineered to meet the stringent safety and performance demands of global industries, this High-Voltage DC Stability Tester adheres toIEC... |
 |
Wire and cable smoke density tester | Product Introduction: STD AOTSI-NBS smoke density test chamber, also known as smoke dense bottom test chamber, the test method comes from the Nati... |
 |
Fuel Contamination Test Dust | Product Introduction: Particle Technology UK offers a full range of materials used in fuel contamination tests, which are used to test the reliabi... |
 |
Geotextile Effective Aperture Tester | Scope of application: The equivalent pore diameter of geotextile and its related products was determined by dry screening method. The geotextile s... |
 |
MST clothing pressure tester-QINSUN | Product Introduction The MST Clothing Pressure Tester/Underwear Pressure tester is used in the body or in the laboratory to easily measure the pr... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | 卖方: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | 卖方: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | 卖方: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | 卖方: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | 卖方: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
