Temperature and Humidity Alternating Test Chamber for Automotive Wires
Standards:
- ISO 16750-4. IEC 60068-2-30: Environmental testing for electrical/electronic components in vehicles.
- DIN 75220. MIL-STD-810G: Military-grade thermal cycling and humidity resistance.
- GB/T 2423.1-2. GB/T 2423.3-4: Chinese national standards for temperature/humidity testing.
- Equivalent Standards: SAE J2344. JASO D001. and major OEM-specific protocols (e.g., Volkswagen PV 1200).
Specification Table：
1. Temperature range: - 40~100℃ (150℃)
2. Humidity range: 30%RH - 98%RH
3. Stability: Temperature ±0.2℃, humidity ±2.5%RH
4. Heating and cooling time: Linear cooling
5. Inner box material: First - grade mirror - finished stainless - steel plate (SUS304)
6. Outer box material: Stainless - steel with matte surface treatment (SUS304)
7. Refrigeration system: Air - cooled, two - stage, fully - enclosed compressor
8. Thermal insulation materials: Rigid foam and glass wool
9. Protection devices: Non - fusing switch, compressor overload protection switch, refrigerant high - pressure protection switch, overtemperature fuse, water pan water - shortage protection switch, electromagnetic protection switch, fault warning system 10. Accessories: Viewing window, two adjustable upper and lower partitions, one 50mm test hole, internal box light
11. Inner box (cm): 40×50×50 H×W×D Outer box: 120×162×106 H×W×D 12. Power supply: 3 - phase AC380V/415V±10% 60HZ
在线联系供应商
Other supplier products
 |
Conical twin screw extrusion platform | Product Introduction: The conical twin-screw torque rheometer is composed of main control unit and conical twin-screw unit, which can simulate the... |
 |
Qinsun Xenotest 220 | Standards ISO 105-B02: Lightfastness testing for colored textiles. AATCC TM16 (Option 3): Accelerated weathering for textiles under controlle... |
 |
Shoe Shank Stiffness Tester | Standard SATRA TM256: Flexural and torsional stiffness testing for athletic, safety, and casual footwear. SATRA TM194: Dynamic fatigue resistance... |
 |
Textile far infrared emissivity tester | Introduction With the continuous advancement of technology, new types of fibers and textile products have emerged, leading to increasingly high de... |
 |
Glow wire tester | F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | 卖方: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | 卖方: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | 卖方: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | 卖方: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | 卖方: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
