Temperature and Humidity Alternating Test Chamber for Automotive Wires
Standards:
- ISO 16750-4. IEC 60068-2-30: Environmental testing for electrical/electronic components in vehicles.
- DIN 75220. MIL-STD-810G: Military-grade thermal cycling and humidity resistance.
- GB/T 2423.1-2. GB/T 2423.3-4: Chinese national standards for temperature/humidity testing.
- Equivalent Standards: SAE J2344. JASO D001. and major OEM-specific protocols (e.g., Volkswagen PV 1200).
Specification Table：
1. Temperature range: - 40~100℃ (150℃)
2. Humidity range: 30%RH - 98%RH
3. Stability: Temperature ±0.2℃, humidity ±2.5%RH
4. Heating and cooling time: Linear cooling
5. Inner box material: First - grade mirror - finished stainless - steel plate (SUS304)
6. Outer box material: Stainless - steel with matte surface treatment (SUS304)
7. Refrigeration system: Air - cooled, two - stage, fully - enclosed compressor
8. Thermal insulation materials: Rigid foam and glass wool
9. Protection devices: Non - fusing switch, compressor overload protection switch, refrigerant high - pressure protection switch, overtemperature fuse, water pan water - shortage protection switch, electromagnetic protection switch, fault warning system 10. Accessories: Viewing window, two adjustable upper and lower partitions, one 50mm test hole, internal box light
11. Inner box (cm): 40×50×50 H×W×D Outer box: 120×162×106 H×W×D 12. Power supply: 3 - phase AC380V/415V±10% 60HZ
Send product request
Other supplier products
 |
Seat Ingress/Egress Simulation Tester-QINSUN | Standard ISO 16840(Wheelchair Seating - Test Methods for Determining Mechanical Properties) FMVSS 207(Federal Motor Vehicle Safety Standard for... |
 |
Civil Aviation Aircraft Interior Non-metallic Materials Flame Retardant Property Tester | Compliance Standards FAR25.853 (FAA Airworthiness Standards for Transport Category Aircraft) CCAR-25-R4.853 (Chinese Civil Aviation Regulations A... |
 |
Geomembrane Hydrostatic and Permeability Tester | Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile （one cl... |
 |
Plastic Pipe Hydrostatic Pressure Burst Tester | Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla... |
 |
Digital Auto Burst Strength Tester-QINSUN | Digital Auto Burst Strength Tester Standards ASTM D3786. ERT 80-4-20. GB/T 7742.1. BS EN ISO 13938-1. BS 3424-6-B, ISO 3303-B, ISO 2758. ISO 3303... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | Seller: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Seller: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | Seller: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | Seller: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | Seller: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
