45 Degree Automatic Flammability Tester
45 Degree Automatic Flammability Testertest instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surface.including bed sheets, blankets, mattresses, pillows, duck down quilts and plush fabric products used to cover the bed.
Test principle:
Within a specified time, the surface of the test sample is burned with a standardized flame, so that the burning, damage degree or discoloration of the standard test paper can be observed, and then the test fabric can be graded and evaluated.
Body stainless steel structure:
SCM control, control interface friendly, easy to operate
Heavy hammer timing stop device, timing accurate
Standard fire mouth
Accessories and Consumables:
Combustion gas supply Device
50 mercerized cotton sewing machine line
Features:
Stainless steel case with transparent viewing window
18 Needle flame, flame length adjustable
Ignition time can be set freely
Automatic timing of flame spread in 0.1 second increments.
Automatic or manual flame impingement for 1,5 or 20 seconds.
Provide bristles and sample clamps
Provide standard stainless steel sample holder
Technical Parameters:
▶ Flowmeter : Adjust the gas flow size;
▶Fire tube : The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe;
▶Windscreen: the upper part of the windshield is provided with glass;
The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.
▶Control panel : Power- power switch ;Start:Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;
▶Reset : Timer reset /Fire tube reset;
▶Sample clamp and specimen holder : The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob;
▶Timer :Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward;
▶Test room size: W368 × D216 × H356mm
▶Sample shelf angle: 45 °
▶Flame spread time setting range: 0.01S-99.99S
▶ignition time of the sample surface : 1.0S ± 0.05S
在线联系供应商
Other supplier products
 |
Auto wire abrasive belt drag grinding machine | Applicable standards: QC/T730-2005, SAE-J1128-2005, DIN 72551, IS06722, JASO D 618and other standards Main parameters: 1,Applicable wire diame... |
 |
Cup testing machine | Product Introduction: The coating cup test machine is suitable for evaluating the coating of varnish and related products （single layer or support... |
 |
Fabric Vertical Flame Spread Test Machine with ISO 6941 | This machine is suitable for one-component or multi-component (coating, quilt, layered, laminated products, and similar combinations) of clothing, ... |
 |
G650D Finished shoe bending tester (heel lift) | Product Introduction: The finished shoe resistance zigzag tester drives the zigzag part of the finished shoe to zigzag repeatedly with the zigzag ... |
 |
Fabric Down-Proof Impact Tester | IntroductionThe first sample is made of bags which built a certain quality of the down. The sample bag is placed on the slope, and the impact needl... |
Same products
 |
Steaming Cylinder | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 3005. BS 4323. NEXT TM 15.... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 12705.1/14272. BS EN 1213... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards AATCC 128, ISO 9867, ENKA 3061... |
 |
Button Impact Tester丨Button Impact Test mechine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D5171 Applications Butt... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Built to American Association ... |
