ROCK REAMER
There is no fixed tooth shape and bearing for the rock reamer, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure, mainly to prevent the roller falling off after the roller bearing is damaged, resulting in the accident in the hole. The roller reamer is suitable for horizontal directional drilling construction, with high design strength, good wear resistance, long service life and good safety performance. The reaming size is 220~1600mm.
Types Of Rock River Reamers
Roller Cone Reamer
It means that the teeth using the roller are milled teeth, that is, the teeth milled out on the matrix of the roller, whose wear resistance is relatively poor. In order to improve its wear resistance, it is often coated with a hard alloy layer.
What Are Rock Reamer Made Of?
01
The Structure Of The Rock Reamer Is Shown In The Figure
The rock reamer mostly uses the single tooth palm of the cone bit and the cone as one cutting edge,
02
With The Number Of Cutting Edges At Least 3
The cone reamer is composed of a rear centering plate, a rear baffle.
03
A Mandrel
A front baffle, a front centering ring, a front centering plate, a cone, and a tooth palm.
04
The Reamer Uses Welding Process To Connect And Fix The Components.
In the process of hole reaming, the screw drill provides torque and the drill provides tension.
We can also offer kinds of hdd hole openerfor sale, anything you need, please leave us a message.
As one of pdc bit suppliers, we can offer sorts of pdc bit for sale, if you are interested, please contact us.
在线联系供应商
Other supplier products
 |
PDC BITS- MAKE MAXIMIZE PERFORMANCE | PDC bit for saleare polycrystalline diamond compact bits. PDC bitare widely used in oil drilling because of their fast drilling speed, long life an... |
 |
PDC DRAG BIT | The PDC drilling drag bitis a composite of four main components: the bit body, the drag blade, the water diverter cap, and the nozzle. Forged from ... |
 |
MATRIX PDC BIT | PDC bit is the abbreviation of Polycrystalline Diamond Compact Bit, also known as Polycrystalline Diamond Cutting Block Bit or Composite Chip Tooth... |
 |
Matrix PDC Drill Bit | PDC matrix bitis a kind of cutting bit that weld the diamond composite piece on the drill head body by brazing. PDC matrix bitis sintered with tung... |
 |
STEEL PDC BIT | The drill body of the Steel PDC Bit is made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite p... |
Same products
 |
railway signal torch tricolor railway signal light | 卖方: 834406 | 铁路奇格尔灯 可广泛应用于铁路、船舶等交通运输行业和一些特殊行业，如信号指示、安全警示和工作照明。 |
 |
Grinding Head X 1/4inch | 卖方: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X 1-3/16inch | 卖方: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X | 卖方: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head G - T Shape (T) | 卖方: Keying Abrasives | KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc... |
