ROCK REAMER
There is no fixed tooth shape and bearing for the rock reamer, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure, mainly to prevent the roller falling off after the roller bearing is damaged, resulting in the accident in the hole. The roller reamer is suitable for horizontal directional drilling construction, with high design strength, good wear resistance, long service life and good safety performance. The reaming size is 220~1600mm.
Types Of Rock River Reamers
Roller Cone Reamer
It means that the teeth using the roller are milled teeth, that is, the teeth milled out on the matrix of the roller, whose wear resistance is relatively poor. In order to improve its wear resistance, it is often coated with a hard alloy layer.
What Are Rock Reamer Made Of?
01
The Structure Of The Rock Reamer Is Shown In The Figure
The rock reamer mostly uses the single tooth palm of the cone bit and the cone as one cutting edge,
02
With The Number Of Cutting Edges At Least 3
The cone reamer is composed of a rear centering plate, a rear baffle.
03
A Mandrel
A front baffle, a front centering ring, a front centering plate, a cone, and a tooth palm.
04
The Reamer Uses Welding Process To Connect And Fix The Components.
In the process of hole reaming, the screw drill provides torque and the drill provides tension.
We can also offer kinds of hdd hole openerfor sale, anything you need, please leave us a message.
As one of pdc bit suppliers, we can offer sorts of pdc bit for sale, if you are interested, please contact us.
Send product request
Other supplier products
 |
Steel PDC Drill Bit | The entire bit body of the pcd drill bitis made of medium carbon steel and machined using a fabrication process. The bit crown is treated with a su... |
 |
PDC CUTTER | Artificial PDC cutter is composed of a layer of polycrystalline diamond cutters and carbide matrix, so it not only has the high hardness, high wear... |
 |
MATRIX PDC BIT | PDC bit is the abbreviation of Polycrystalline Diamond Compact Bit, also known as Polycrystalline Diamond Cutting Block Bit or Composite Chip Tooth... |
 |
PDC DRAG BIT | The PDC Drag Bit consists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body of the s... |
 |
PDC CORE BIT | PDC core bits, also called hollow bits, are a kind of thin tubular multi-tooth bits with carbide chips embedded in them. The PDC core drill bit is ... |
Same products
 |
Grinding Head X 1/4inch | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X 1-3/16inch | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head G - T Shape (T) | Seller: Keying Abrasives | KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc... |
 |
Grinding Head G - Triangular Trapezoid Shape (TT) | Seller: Keying Abrasives | KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc... |
