BLADE LIFTER

After the rapid development of the wind energy market in recent years, the wind energy resources in the plain area with good construction conditions have almost been developed. At present, wind turbine heavy haul transport carriers are being transported to the mountainous area and sea with difficult construction conditions. However, the mountain roads are narrow and the turning radius is small.

In order to effectively avoid the collision between the wind blade and the mountain, the wind blade must be transported in an inclined state. Therefore, Rui trailer's blade lifterfor wind turbine appears in the market, and will greatly help for a transport company for such area to use.

BLADE LIFTER SPECIFICATIONS

Dimention:	10420*3400*3865mm
Lifting angle:	0-36 degree
Lifting mode:	duel cylinder lifting
Rotate mode:	4 motor drive
Rotate of blade:	2 motor drive
Control:	manual+wireless control
Counter weight size:	1600*1400mm
Shifting distance:	0-4000mm
Shifting mode:	duel cylinder push
Weighing mode:	4 point weight
Capacity:	510 ton*m
Dead weight:	47,000kgs

HOW DOES BLADE LIFTER TRANSPORTWORK?

Generally, in order to make the wind blade avoid obstacles more effectively, it is also necessary to make the blade rotate horizontally 360 °, so a slewing bearing is set between the blade lifter and the slewing platform. However, when the blade lifter lifts the blade, the center of gravity of the blade rises upward and moves to one side of the blade lifter. If the blade lifter wind turbineof the distance from the vertical line passing through the center of gravity of the wind blade to a certain point and the weight of the wind blade is the blade gravity distance, the gravity distance of the wind blade relative to the slewing bearing changes during the lifting process of the wind blade.

In other words, the balance condition of the blade lifter is different under the horizontal and lifting state of the wind blade. This brings a problem, that is, if it is designed that the upper part above the slewing bearing is balanced when the wind blade is lifted by a certain angle, such as 30 ° (the center of gravity of the upper part is on the axis of the slewing bearing), the blade can rotate 360 ° when the blade is lifted by 30 ° or near, but if the blade is placed horizontally, one side of the blade is too heavy. When 360 ° rotation, the blade lifter can easily turn over to one side of the wind blade. If the upper part is designed to be balanced when the wind blade is placed horizontally, it can rotate 360 ° when the wind blade is placed horizontally. However, if the wind blade is lifted at a certain angle, such as 30 °, one side of the counterweight is too heavy. When turning 360 °, the blade lift is easy to overturn to one side of the counterweight.

However, it is inevitable that the center of gravity will rise when lifting the wind blade. Therefore, how to make the center of gravity of the upper part only rise while the gravity distance relative to the slewing bearing remains basically unchanged or changes as little as possible is the problem that the blade lifter needs to solve.

The simplest blade lifteris to hinge a swing frame on the rotary platform, set a pitch slewing bearing between the swing frame and the transition plate, fix the wind blade on the transition plate, and push the swing frame to swing around the hinge fulcrum through the lifting oil cylinder, which can lift the wind blade upward at a certain angle.

At present, blade lifter in this special market mainly adopts three technical ways to solve this problem. First, increase the weight of the whole unit so that the weight of the rotating platform, blade lifter and wind blades, which change the weight of the loaded heavy moment, is relatively small, so that the change of the heavy moment of the whole unit is relatively small during the lifting process; The second method is to set the movable counterweight, that is, set the movable counterweight on the rotary platform, and move the counterweight automatically or manually while lifting the wind blade, so that the center of gravity of the upper part is basically maintained on the axis of the rotary bearing; The third is the method of moving the blade lifter, that is, setting a sliding slider and chute to make the blade lifter slide to one side of the slewing bearing while lifting the wind blade, so as to keep the center of gravity of the upper part basically on the axis of the slewing bearing.

WHY CHOOSE RUI TRAILER AS YOUR BLADE LIFTER TRANSPORT SUPPLIER？

Blade lifters for wind power plants frequently present haulage companies with a difficult task. Especially when dealing with the "last mile", transport is often more difficult particularly when tight corners or obstacles have to be negotiated. It is precisely in these situations that the new blade rotator from Ruiqianhe provides the right solution to avoid obstacles such as trees or buildings with the rotor blades even more effectively. Also on steep hills or narrow winding mountainous roads, the position of the rotor blade can be adapted to the route without any time loss. The blade rotator can be mounted and transported on a pulled platform trailer combination and guarantees flexible transportation of rotor blades from different manufacturers through the quick release plate and thus maximum efficiency and cost-effectiveness in daily use.

Angle of inclination up to 60°

Maximum stability due to a hydraulically-operated, sliding counterweight in longitudinal and horizontal directions depending on the rotor blade position

Operating temperature – 20 °C up to + 40 °C

If you want to know more types of heavy haulage trailers, please visit our website.

Other supplier products

	SPMT	SPMT for Sale As the combination product of Self Propelled Trailerand modular trailer, spmt vehicleis equipped with a power system and changes e...
	HEAVY DUTY TRAILER APPLICATION FOR WIND ENERGY	For the wind blade, its length is very long, till today some of them are over 100 m long, which has become the main feature different from other co...
	MODULAR TRAILER	A modular trailers for heavy equipmentis normally used for transporting heavy loads over 80t. It is generally applicable to the medium and long-dis...
	Semi Low Loader	Semi Low Loader are mainly transport with all kind of earth moving machine, such as crane, bull dozer, motor grader, fork lift and other heavy equi...
	HYDRAULIC AXLE TRAILER	Hydraulic axlestrailer is the basic model of the heavy cargo logistics transportation industry, which is the design basis of most heavy cargo trans...

供应产品

Same products

	MODULAR TRAILER	卖方: shanghai ruiqianhe imp&exp co.,ltd	Modular trailers for heavy equipmentare normally used for transporting heavy loads over 80t. The ...
	HYDRAULIC AXLE TRAILER	卖方: shanghai ruiqianhe imp&exp co.,ltd	Hydraulic trailer is the basic model of the heavy cargo logistics transportation industry, which ...
	GIRDER CARRIER	卖方: shanghai ruiqianhe imp&exp co.,ltd	Girder Carriercarrying capacities of 120T, 160T, 180T, 220T, 250T, and 300T that can be used dire...
	GIRDER BRIDGE TRAILER	卖方: shanghai ruiqianhe imp&exp co.,ltd	Girder Bridge Trailer is an indispensable category in the field of heavy cargo transportation. Wi...
	EXTENDED FLATBED TRAILER	卖方: shanghai ruiqianhe imp&exp co.,ltd	The traditional low-bed trailer can not meet the demand of long cargo transportation in many case...