Manufacturing Explanation of Cement Sleepers and Measures for Their Smooth Surface

One of the common making concrete sleepersis cement railway sleepers, which are made of C50 concrete. In order to ensure the quality, the raw materials used in train track sleepers should meet the requirements and the quality should be qualified. Moreover, the proportion of concrete should be determined by test, in which the amount of cement should not exceed 450kg/m³and its viscosity should meet the requirements.

Concrete mixing should be uniform and carried out in accordance with the requirements; short railway sleepers and bottom formwork should be manufactured with steel molds, and the wedge-shaped surface at the bottom of short sleepers is rough surface, so it needs to be roughened. If steam curing is used, then it should be carried out according to the requirements, humidity measures should be taken in summer and heat preservation measures should be taken in winter.

The concrete making concrete sleepers can only be demoulded, moved and transported after meeting the specified strength requirements. When short sleepers are transported, collision should be avoided to prevent damage. The surface of the sleeper should be smooth, and no defects such as air holes and hemp surface should be allowed, thus affecting the aesthetics, and cracks can not be found. In addition to anchoring steel bars, the steel bars in other parts should not be exposed.

In order to ensure that the concrete sleepers surface is smooth, the sleeper should be wetted first. But be careful that there is no water on the surface. ZV glue and cement are mixed and stirred in proportion of 1:0.8 to form cement slurry, which is then pressed into pitting and pore. Pay attention to compaction, and then maintain it. When it reaches a certain strength, use fine sand paper to polish its surface to make it smooth and smooth.

If it is relatively small, it can be done according to the method of treating stomata and hemp surface. If it is relatively large, the weak part should be chiseled out first and then wetted sufficiently. After mixing cement, medium sand and ZV glue in proportion, fill them in the weak part and compact it. Wait until the concrete solidifies slightly before modifying the outer surface.

If it is lack of edge and corner, if the area is relatively small, wet it first, and then use cement mortar to patch up. If the area is relatively large, then use cement, medium sand, stone and ZV glue, mix well according to the proportion, then repair and maintain it, and then modify the external surface.

Weihai Ruihe Railway Sleepers Co.,Ltd, as one of the railway sleeper suppliers, has intensively collaborated on the railroad market at home and abroad. We firmly believe: Responsibility contributes to the Value, and assure compliance with the strictest quality standards.

Other supplier products

	Concrete Sleeper/Tie	We have concrete railway sleepers for sale! A concrete sleeper (British English) or concrete tie (American English) is a type of railway sleeper or...
	Wooden Sleeper	Do you want to buy hardwood sleepers? Timber (wooden) sleeper, it is a kind of wooden sleeper. For the railway system, the railroad timber sleepers...
	Manufacturing Explanation of Cement Sleepers and Measures for Their Smooth Surface	One of the common making concrete sleepersis cement railway sleepers, which are made of C50 concrete. In order to ensure the quality, the raw mater...
	Steel Sleeper	Steel railway sleeperscan provide lower installation and maintenance costs and more efficient logistics that are designed to cater for all types of...
	Wooden Sleeper	We have hardwood railway sleepers for sale. Timber (wooden) sleeper, it is a kind of wooden sleeper. For the railway system, the railroad timber sl...

供应产品

Same products

	36V智能锂电钢轨钻孔机	卖方: 842518	智能锂电钻孔机，采用恒功率的专利技术，确保了电机对扭矩输出的控制功能，加上3KW超大功率，让恒速钻孔轻松实现。既保证钻孔的快速，又防止操作者用力过猛对钻头和电机造成损伤。LED转速报警灯可以实时...
	内燃钢轨钻孔机	卖方: 842518	内燃钢轨钻孔机，是适用于铁路工务、工程部门钻制钢轨鱼尾板螺栓孔的专用机械。适合于对P65、P75钢轨的钻孔作业。它以小型汽油机为动力，经过专用减速器减速，带动钻杆旋转。采用手柄驱动齿轮、齿条实现...
	72V便携式锂电锯轨机	卖方: 842518	超强劲无刷直流电机，最大功率大于8KW，切割高效 60轨，切割时间小于90秒 整机13公斤，超轻设计。电池7公斤，搬运和充电时，可从整机上拆分下来。 超长续航，一次充电，可以切割6个头（6...
	K1270切轨机	卖方: 842518	具有切割精度高，切割速度快，可以左右切割的特点。 独特的镁铝合金锯片罩，重量轻，切割钢轨后无铁屑残留，延长了锯片罩的使用寿命。
	内燃切轨机	卖方: 842518	内燃切轨机是我公司根据现场施工单位实际要求，最大限度减轻重量，提高切割速度，新一代内燃切轨机；是铁路工务.桥梁.线路大修等部门理想的钢轨切割工具。惯用，线路的维修。抢修。特别是无电源的地段和区间...