.

Frog and Switch Point Grinder

The NCM-4.0 frog&switch point grinding machine is the most economical machine in the market for your turnout maintenance and repair, it can be used to grind frog, switch points, switch cores, top and side flashes of guard rails, and can also grind the rail flashes of crossovers and standard rails.

It can be tilted by 36° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions. So that the grinding device of the machine can work very accurately in the narrow space between the rails. According to customer needs, Honda GX160 or GX200 gasoline engine can be selected as power, and the installation dimensions of the two engines are the same.



在线联系供应商

至: 武汉联科瑞际轨道设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

YLS-900 Hydraulic Rail Tensor
YLS-900 Hydraulic Rail Tensor It's suitable for 75kg/m and 60kg/m type rail stress relief and seamless long rail relaying. While operatingin the feld at a certain temperature ra...
Platform Gauge
Platform Gauge Platform gauge is usd for measuring the distance between the railway track center and the platform side and the height between the rail surface...
Frog and Switch Point Grinder
Frog and Switch Point Grinder The NCM-4.0 frog&switch point grinding machine is the most economical machine in the market for your turnout maintenance and repair, it can be ...
Portable Rolling Track Gauge
Portable Rolling Track Gauge The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device...
YD-22 Hydraulic Tamping Machine
YD-22 Hydraulic Tamping Machine YD-22 hydraulic tamping machine is a kind of profes-sional machinery used for railway line ballast tampingmaintenance except for turnouts. lt can b...
供应产品

Same products

36V智能锂电钢轨钻孔机
36V智能锂电钢轨钻孔机 卖方: 842518 智能锂电钻孔机,采用恒功率的专利技术,确保了电机对扭矩输出的控制功能,加上3KW超大功率,让恒速钻孔轻松实现。既保证钻孔的快速,又防止操作者用力过猛对钻头和电机造成损伤。LED转速报警灯可以实时...
内燃钢轨钻孔机
内燃钢轨钻孔机 卖方: 842518 内燃钢轨钻孔机,是适用于铁路工务、工程部门钻制钢轨鱼尾板螺栓孔的专用机械。适合于对P65、P75钢轨的钻孔作业。它以小型汽油机为动力,经过专用减速器减速,带动钻杆旋转。采用手柄驱动齿轮、齿条实现...
72V便携式锂电锯轨机
72V便携式锂电锯轨机 卖方: 842518 超强劲无刷直流电机,最大功率大于8KW,切割高效 60轨,切割时间小于90秒 整机13公斤,超轻设计。电池7公斤,搬运和充电时,可从整机上拆分下来。 超长续航,一次充电,可以切割6个头(6...
K1270切轨机
K1270切轨机 卖方: 842518 具有切割精度高,切割速度快,可以左右切割的特点。 独特的镁铝合金锯片罩,重量轻,切割钢轨后无铁屑残留,延长了锯片罩的使用寿命。
内燃切轨机
内燃切轨机 卖方: 842518 内燃切轨机是我公司根据现场施工单位实际要求,最大限度减轻重量,提高切割速度,新一代内燃切轨机;是铁路工务.桥梁.线路大修等部门理想的钢轨切割工具。惯用,线路的维修。抢修。特别是无电源的地段和区间...