Hydraulic Rail Turnout Tamping Machine
YCD-2 hydraulic tumout tamping machine is a special mainenance mechanical equipment for railway turmouts. it is mainly used for tamping the seeper bllast in the tumout section, and can also take into account the tamping efect of the main track bed ballast.
BENEFITS
● This machine uses Honda gasoline engine GX390 as power, light weight, easy to start, at low tmeatate low noise and low pllution. which greall improves the working environment of workers and reduces labor intensity
● This machine adops patente tchnologoyswingng taveling frame, the traveling frame can swing feely, so that each team of tamping picks can be aligned with the sleepers and iserte at the same time, the tamping eficiency is higher, and the tamping efiet is better
● The machine adopts large excitation force, large amplitude, and no counterfrei nsetion, without rail clamping, counterweight and other devices, which improves work efficiency
● Insert under its own weight, no clamp, no damage to the rail
● The piston rods at both ends of the synchronous cylinder adopt "chain link articulation"
在线联系供应商
Other supplier products
Lithium Battery Bolt Wrench Machine | LLB-500 lithium battery bolt wrench machine is a new product developed by, our company in accordance with international requirements for environmen... | |
Portable Rolling Track Gauge | The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device... | |
Digital Track Gauge | Digital Track Gauge is a special design for global market. It is used for measuring the track gauge, check rail gauge, back to back distance, Cant(... | |
NQG-5III Rail Cutting Machine | NQG-5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m~75kg/m. The quality of cutting section meets the requirem... | |
Aluminum case for track gauge | Aluminum case is used for packing the track gauge . Different size: 1000mm ,1067mm,1435mm ,1676mm etc |
Same products
CNC控制钢轨数字打磨机轨头轮廓打磨设备 | 卖方: Wuhan linkage track equipment co., ltd | NGM-5.1轨道轮廓打磨机 该机主要用于铁路轨道焊接接头及轨道表面修复的成型打磨作业。 数控进给单元的开发与应用,实现了砂轮进给的智能控制。 显著提高轮廓精度和打磨效率。 优点● 使用... | |
汽油发动机轨道轮廓打磨机用于轨头打磨 | 卖方: Wuhan linkage track equipment co., ltd | NGM-5.1轨道轮廓打磨机 该机主要用于铁路轨道焊接接头及轨道表面修复的成型打磨作业。 数控进给单元的开发与应用,实现了砂轮进给的智能控制。 显著提高轮廓精度和打磨效率。 优点● 使用... | |
定制汽油发动机双套筒钢轨冲击扳手手推钢轨螺栓扳手 | 卖方: Wuhan linkage track equipment co., ltd | NLB-650 轨道冲击扳手车厢拧紧机 LK-650 轨道冲击扳手车厢拧紧机是铁路线路机械化养护设备,主要用于标准混凝土轨枕紧固件螺母的维护。它以汽油发动机为动力,通过齿轮泵、换向阀、液压马达... | |
轨道扭矩扳手双套筒轨道车厢拧紧机 | 卖方: Wuhan linkage track equipment co., ltd | NLB-650 轨道冲击扳手车厢拧紧机 LK-650 轨道冲击扳手车厢拧紧机是铁路线路机械化养护设备,主要用于标准混凝土轨枕紧固件螺母的维护。它以汽油发动机为动力,通过齿轮泵、换向阀、液压马达... | |
NLB600 液压铁路冲击扳手用于轨道工作 | 卖方: Wuhan linkage track equipment co., ltd | 用于轨道维修工作的液压铁路螺栓冲击扳手机 液压铁路螺栓冲击扳手机可快速轻松地拧紧和松开轨道沿线的所有扳手接头。控制准确、稳定。该机采用汽油机为动力,输出轴为单头、单速、正反转可调,输出扭矩可手... |