Heavy duty boat ship moving airbag for lifting salvage

Advantages of ship moving airbag

1.Qingdao Florescence specializes in the production of ship moving airbag since 1992.
2.Ship moving airbags use the best materials (Thailand natural rubber RSS3) and can reuse 6-8years without misuse.
3.Our factory paied attention on product quality for over 20years to make sure our customers use well.
4.Wear resistance and anti aging ship moving airbag with CCS,BV certificate.
5.Need no more than air compressors, winch and ropes. Much cheaper and portable than other methods.
6.We support customer worldwide,such as America, Singapore, Greece, Indonesia,etc.

Performance calculation principle of ship moving airbag

The bearing capacity of marine airbags was calculated based on the working pressure, contact area. Herein, working pressure was got upon the burst pressure and safety working factor.
Because of the flexibility of marine airbag the contact area will be affected by some terms which include the carried ship condition, the different position from gravity center during the process of ship launching and pulling. So the bearing capacity of airbags will vary as well as the contact area.
The approximate bearing capacity can be calculated as follows:
F=PS S=π x (D1-D2)/2
Mark:
F: Bearing capacity
P: Inner pressure
S: Contact area
D1: Diameter of airbags when free of loat
D2: Working height of airbags when loaded

Attentions during ship moving airbag use and ship launching

1.The airbags must be checked if the pressure gage is normal before used.
2.The working pressure of the airbag whenused should compare the data in the bearing oressrre capacity from mustn't use excessive pressure.
3.It must clean the sharp and protruding hard objects on the ground which could contact with the airbag body before the airbag being used, in case it punchures the skin of the airbag.
4.The distance of the airbag under the ship should no less than 1.5m,the distance after compression should at least 0.8m, in case it occours the airbag overlapping phenomenon when the ship launching.
5.Lifting after the airbag be forced under the snip, when most of the ship is raised up,demount the pier-top and force the rolling airbag at the same time. If there is one or two pier-top impacted which is difficult to take out, do not let the works force todemount the pier-top,if the pier-top is demounted, it is easy to suffer from the slip gravity, and then will make the airbag explosive. The workers should check the working pressure of the airbag.

Application of ship moving airbag

Why choose Florescence

1. Value for Money, you will get the best price based on the excellent quality.
2. Unrivalled Expertise, we promise first-rate product quality and service.
3. Good product lifespan and quality warranty, our products has a long servicing life for 6-8years.
4. Professional after-sales service. We will help our customers to solve any product's questions within 24 hours.
5. For our customers, we will provide a set of repaire tools with free.