jmy601 uart TTL Level interface rfid reader and writer modules
JMY601 series are RFID reader/writer module with UART serial ports. JMY601 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through UART interface. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.
- Qualifications:
- • PCD: NXP RC531, RC632
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B, ISO15693
- • Operating distance: 80mm(MIFARE One, typical distance)
- • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- • Auto detecting card: Supported, default OFF
- • EEPROM: 512 Bytes
- • Interface: UART
- • Baud rate: 19200bps--115200 bps
- • Max.command length: 254 Bytes
- • Interface level: 3.3V(TTL level; 5V tolerance)
- • Power supply: DC5V
- • Power consumption: 80mA
- • Dimension: 60mm×60mm×5.7mm
- • Weight: about 20g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • RoHS: Compliant
Other supplier products
|
|
jmy501 hf 13.56mhz rfid reader and writer modules |
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of con... |
|
|
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY6801 |
JMY6801 is a RFID read/write module with UART, IIC, RS232C or USB port. JMY6801 has various functions and supports multi ISO/IEC standard of contac... |
|
|
JMY602 IIC UART RS232C or USB interface HF RFID Reader and writer Module |
JMY602 series are RFID reader/writer module with IIC or UART or USB ports. There are 2 SAM card slots in the module which supports SAM cards compli... |
|
|
IIC, UART, USB interface HF 13.56MHz RFID writer and reader Module JMY628 |
JMY628 is a RFID read/write module with UART, IIC or USB port. JMY628 has various functions and supports multi ISO/IEC standard of contactless card... |
|
|
HID standard USB interface HF RFID Reader Module JMY608 |
JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to re... |
All supplier products
Same products
