TXCM1LE Molded Case Circuit Breaker
Scope of Application
TXCM1LE Molded Case Circuit Breaker is one of the new breakers which have been designed and developed by the company using international advanced technology. Suitable for the circuits of AC 50Hz, rated voltage of 400V, rated current of 16A to 800A.
Its main function is to provide indirect contact protection for personal electric shock of fatal danger. Rated residual operating current does not exceed residual current operated circuit breaker of 0.03A when other protection measures are invalid, also can provide supplementary protection for direct contact, but not as the only direct contact protection. At the same time, CM1LE MCCB can also prevent electrical fire caused by the contact fault current. And CM1LE MCCB can protect overload and short circuit of the circuits, can also be used for infrequent conversion of the circuits.
TXCM1LE MCCB can be mounted vertically (upright) or horizontally (transverse).
Meet the standards: GB 14048.2, IEC 60947-20
Normal operating conditions and installation conditions
Ambient air temperature
The upper limit of ambient air temperature is +40℃;
The lower limit of ambient air temperature is -5℃;
The average value of ambient air temperature within 24h does not exceed +35℃.
Altitude: The altitude of the installation site is not more than 2000m.
Pollution degree: 3.
Installation category: III.
Atmospheric conditions: The air relative humidity in the highest temperature + 40℃ for not more than 50%; In the low temperature can have higher relative humidity. The maximum average relative humidity is 90%, while the average monthly minimum temperature is +20℃, and consider the temperature changes in product on the surface of the gel.
External magnetic field: The external magnetic field in the vicinity of the installation site does not exceed 5 times the geomagnetic field in any direction.
Other supplier products
|
|
ZW32-12 outdoor vacuum circuit breaker |
Product Overview ZW32-12 outdoor vacuum circuit breaker is a three-phase AC 50Hz outdoor high voltage switch equipment, mainly used in the 10kV out... |
|
|
TXJQ3 Electrical Isolation Switch |
Scope of Application TXJQ3 Electrical Isolation Switch is used for AC 50 / 60Hz, rated voltage 230-400V , 63A to 125A of rated current in the resis... |
|
|
TXDL18-63 Residual Current Circuit Breaker |
Scope of Application TXDL18-63 Residual Current Circuit Breakers are widely used in domestic and foreign industrial, commercial and civil construct... |
|
|
TXCM1 Molded Case Circuit Breaker |
Scope of Application TXCM1 Molded Case Circuit Breaker, is new circuit breakers which have been designed and developed by the company using interna... |
|
|
SVC Voltage Stabilizer |
Product Overview SVC Voltage Stabilizer (TND Single Phase Voltage Stabilizer, TNS three phase voltage stabilizer) is composed of contact regulator ... |
All supplier products
Same products
