Intermediate Wire Drawing Machine with Online Annealing
Application:Intermediate Copper Wire Drawing Machine with Annealeris used for drawing and annealing copper wire from 3.0mm to 0.4-1.6mm.Outlet wire can be collected by single spool take up or coiler.Feature:
This type is used for drawing copper wire and other alloy wire with annealer from 2.6-3mm to 1.13-2.78mm.
1)Max.Dies Qty: 17
2)Outlet wire size: 0.40-1.60mm
3)Max speed:25-30m/s
4)Vertical annealing.
Main Specification:
|
Machine type |
SY-17DHT |
|
Control system |
PLC |
|
Inverter control |
Dual inverter control |
|
Drawing dies No./max. |
17 |
|
Inlet diameter |
Ø 2.5- 3.5mm |
|
Out diameter |
Ø0.4- 1.6mm |
|
Drawing line speed /max |
2000m/min |
|
Slip ratio of m/c |
20% |
|
Fix speed capstan slip ratio |
|
|
Frame |
Ironed cast |
|
Capstan |
Carbon fibre plasma capstan |
|
Main motor |
55kw |
|
Spooler motor |
11kw |
|
Fix speed capstan dia. |
Ø 250mm |
|
Ø 250mm |
|
|
Annealing voltage |
DC 0-60V |
|
Annealing current |
DC 2000A |
|
Protection type |
Steam or nitrogen |
|
Spool bobbin size |
Ø 500mm or according to customers |
|
Optional take-up machine |
Coiler |
Advantages:
1). For same finished size, compare to Rod Breakdown Machine, electricity and energy saving.
2). Ironed cast and Wear-resistant capstan can keep long life.
3). Fully immersed lubrication, lubrication tank body is separated with gear box without oil mixed.
4). Besides normal copper, also is a good choice for welding wire
5)Horizontal annealing design is easily for operating.
6) Longer annealing section with tension ensure good and stable elongation.
Send product request
Other supplier products
 |
Copper Wire Bunching Machine 630 | 1-Application: Wire winding road of Copper Wire Bunching Machine 630is from the pay-off device through the disconnection sensing area, first pass ... |
 |
Individual Driver Controlled Rod Breakdown Machine | 1-Application: Rod Breakdown Machine with Individual Drives is used for drawing copper and aluminum or alloy wire with high speed. 2-Main feature... |
 |
Super Fine Wire Drawing Machine | Application: This machine is special used for drawing wire 0.04-0.15mm. Finished wire is wound by plastic bobbin. Main feature: Adoptin... |
|
|
Intermediate Wire Drawing Machine with Online Annealing | Application:Intermediate Copper Wire Drawing Machine with Annealeris used for drawing and annealing copper wire from 3.0mm to 0.4-1.6mm.Outlet wire... |
Same products
 |
Fast and Effective Solder Removal for Electronics | Seller: Shenzhen Wikshu Technology Co. | WYLIE 3M Desoldering Wick 2.0mm 2.5mm 3.0mm 3.5mm 3.0M Soldering Wires with thumb wheel dispenser... |
|
|
Copper Wire Bunching Machine 630 | Seller: Zhangjiagang Mentors Machinery Co.Ltd | 1-Application: Wire winding road of Copper Wire Bunching Machine 630is from the pay-off device t... |
|
|
Individual Driver Controlled Rod Breakdown Machine | Seller: Zhangjiagang Mentors Machinery Co.Ltd | 1-Application: Rod Breakdown Machine with Individual Drives is used for drawing copper and alumi... |
|
|
Intermediate Wire Drawing Machine with Online Annealing | Seller: Zhangjiagang Mentors Machinery Co.Ltd | Application:Intermediate Copper Wire Drawing Machine with Annealeris used for drawing and anneali... |
|
|
Super Fine Wire Drawing Machine | Seller: Zhangjiagang Mentors Machinery Co.Ltd | Application: This machine is special used for drawing wire 0.04-0.15mm. Finished wire is wo... |
