Automatic Solar module laminator
The Laminator is the equipment that performs the encapsulation of solar cells into the PV glass with the help the polymerization of encapsulation materials of the laminate – usually the EVA.
This step is carried out under temperature about 150℃ and vacuum to avoid any presence of gas bubbles in the module.
Lamination quality should ensure adherence of the different layers of the laminate during the desired lifetime of the module.
The laminator should ensure good repeatability of this lamination as well as maintenance and operating costs low.
Goldsolar laminator solar membrane is equipped with long life that provide a low maintenance rate.
For the detail please contact us.
Send product request
Other supplier products
 |
Solar cell tester | Model Name GTC-3A GTC-B LampSpectrum Inlinewithiec60904-9spectralIrradiancedistributionrequirement(AM1.5) Lightintensity 100mW/cm2(continuousad... |
 |
Solar module framing machine | Model Name GSFM-2011 Maximum group-frame outside dimensions(four squares) 2000×1100×（35～50）mm Minimum group-frame outside dimension... |
 |
Solar module tester | Model Name GSS--2012 Lamp Spectrum In line with iec60904-9 spectral Irradiance distribution requirement(AM1.5) Light intensity 100mW/cm2 (cont... |
|
|
Automatic Solar module laminator | The Laminator is the equipment that performs the encapsulation of solar cells into the PV glass with the help the polymerization of encapsulation m... |
 |
Laser scribing machine | Model Name GSC-50K Laser wavelength 1064nm Laser power 50W Scribing width 50μm Scribing speed 100mm/s Scribing accuracy ±10&m... |
