Solar module tester
Model Name GSS--2012
Lamp Spectrum In line with iec60904-9 spectral Irradiance distribution requirement(AM1.5)
Light intensity 100mW/cm2 (continuous adjustable range 70-120W/cm2)
Light intensity non-uniformity ±2% A grade
Instability degree of irradiation ≤±2%A grade
Test result consistency ±0.5%
Test error of electrical properties ≤±1%
Single flash time 10~100ms
Effective Test range 2000x1200/5W~300W
Measuring votage 0~100V(resolution 1mV)
Measuring current 0~20A(resolution 1mA)
Test Parameters 1sc, Voc, Pmax, Vm, Im, FF, EFF, Temp, Rs, Rsh
Other supplier products
|
|
Semi-automatic solar module laminator |
The Laminator is the equipment that performs the encapsulation of solar cells into the PV glass with the help the polymerization of encapsulation m... |
|
|
Solar module framing machine |
Model Name GSFM-2011
Maximum group-frame outside dimensions(four squares) 2000×1100×（35～50）mm
Minimum group-frame outside dimension... |
|
|
Automatic Solar module laminator |
The Laminator is the equipment that performs the encapsulation of solar cells into the PV glass with the help the polymerization of encapsulation m... |
|
|
Laser scribing machine |
Model Name GSC-50K
Laser wavelength 1064nm
Laser power 50W
Scribing width 50μm
Scribing speed 100mm/s
Scribing accuracy ±10&m... |
|
|
Solar module tester |
Model Name GSS--2012
Lamp Spectrum In line with iec60904-9 spectral Irradiance distribution requirement(AM1.5)
Light intensity 100mW/cm2 (cont... |
All supplier products
Same products
