Salt spray corrosion test chamber
This product series can simulate the marine climate and can be used to test the salt fog resistant performance of materials, products and their coatings. They can also be used to evaluate the quality of the coatings. The interior and exterior sides of the chamber are made of reinforced plastic (or PVC) by compression molding, which are acid-proof, alkali-proof, impact-proof and easy to clean. Wall-mount spray system can be freely placed without occupying any effective test space. With an imported quartz nozzle, it has the characteristics of smooth interior wall, accurate angle and no crystalline in long-time spraying. Distinctive spring door hinge design makes the chamber door easy to open and close. And there is no leak from the baths around.
Ozone ageing test chamber: This product series are mainly used to evaluate the ozone ageing resisting performance of rubber and the protective efficacy of the antiozonant so as to take the effective ozone-ageing resisting measures to extend the life span of the rubber products. The whole ozone generating and capture process is performed in an airtight loop, which guarantees the safety of people. Static strain and dynamic strain are both considered. And an interface with the conventional chemical test of ozone concentration is provided to help
Model S-150 S-210 S-750 S-010 S-016 S-020
Workroom dimension (cm) 45*60*40 60*90*50 75*110*50 85*130*60 85*160*60 90*200*60
External dimension (cm) 80*108*108 96*140*135 115*175*140 125*200*155 125*300*155 130*270*155
Temperature range RT+10℃～60℃
Humidity range: 95% ~ 98% RH
Temperature fluctuations ± 0.5 ℃
Temperature deviation: ± 2.0 ℃
Air saturator RT＋5℃ ～ 55℃
Spray deposition 1～2ml / 80cm2 • h
Spray type Continuous / Periodic
■ Structure characteristics
1.Equipment structure takes up PVC . It not only has good profile, but also has fine corrosion resistance.
2.It has advanced and innovative control theory, it integrates three control systems of PLC, HMI and SOC in fine way. Control is correct by 100%, and you can experience the novel control feeling;
3.It most powerful and reliable PLC and special modules in the industry circle. 50 programs and 2500 steps are provided for user to make setting/storage and running;
4.It utilizes protection module for safe voltage, the withstand voltage can reach 500V. After energizing the equipment, the equipment will not be burned and it can protect the equipment by 100%.
5.It takes up high-sense FastAIT monitoring and refrigerating system imported and achieves effective control and management for refrigerant volume;
6.It has automatic safety protection switch, which has high sensitivity, can detect any state, cut off protection and give alarm in shortest time and assure safety of the personnel and equipment;
7.Temperature and humidity range: 95~98%RH, the moisture can reach within 80%RH after installing the dehumidifying device;
8.It has air supply and circulating system, which can avoid dead angle of air flow in the chamber and improve the uniformity degree of product temperature and humidity.
9 Thermal-insulating material: high-density isocyanurate foam + glass fiber
Send product request
Other supplier products
 |
Shock test Chamber | Thermal shock test chambers are classified as 2-chamber dynamic shock and 3-chamber static shock. They can be used in thermal shock test as well as... |
 |
Dust Ingress Chambers | This product is applicable for the dust proof and resistant test of various auto components and parts including lamps, meters, electric dust proof ... |
 |
Ozone climatic test chamber | This series is applicable for the aging cracking test of non-metal materials and rubber products. Model OC-100 OC-250 OC-500 OC-010 Workroom dime... |
 |
Temperature & humidity test chamber | This product series is widely used in the temperature variation tests, cold resistance tests and storage with low-temperature in the fields of aero... |
|
|
Salt spray corrosion test chamber | This product series can simulate the marine climate and can be used to test the salt fog resistant performance of materials, products and their coa... |
Same products
 |
Small waste incinerator. Beach garbage incineration | Seller: Hangzhou Fire Print Technology Co., Ltd. | Green waste incinerator can be customized: Content product: 5 cubic meters, 2 tons of garbage dis... |
 |
Strong disinfection and sterilization equipment for classrooms | Seller: Hangzhou Fire Print Technology Co., Ltd. | Space disinfection equipment Strong disinfection and sterilization equipment for classrooms Power... |
 |
Machining | Seller: Hebei Jinganruineng Environmental Science & Technology Co., Ltd | Machining Product description: Our company has a variety of large-scale machining equipment a... |
 |
Enamelled Steel Plate | Seller: Hebei Jinganruineng Environmental Science & Technology Co., Ltd | Enamelled Steel Plate Product description: Enamel assembly tank is made of enamel steel pla... |
 |
Gas Holder | Seller: Hebei Jinganruineng Environmental Science & Technology Co., Ltd | Gas Holder Product description: We take use of corrosion - resistant, high - strength membr... |
