Ozone climatic test chamber

• 

This series is applicable for the aging cracking test of non-metal materials and rubber products.

Model OC-100 OC-250 OC-500 OC-010
Workroom dimensions (cm) 45*45*50 50*60*75 70*80*90 100*100*100
Exterior dimensions (cm) 115*90*165 120*110*190 135*128*210 165*148*220
Power 4.0(KW) 4.5(KW) 4.5(KW) 6.5(KW)
Temperature range 0℃～70℃
Humidity range ≥65％R.H
Ozone density 50~1000 pphm
Temperature fluctuation ±0.5℃
■ Structure characteristics

1.Equipment structure takes up stainless steel plate plus (41090) power for hull painting. It not only has good profile, but also has fine corrosion resistance.
2.It utilizes imported closed-type compressor unit imported from Europe and USA, which has solid and durable structure and is endurable and can greatly enhance service property and life of the equipment; it takes up advanced energy-saving design, which can save electric power by 30%, save water by 20%, and it uses HFC refrigerant that will not harm human body and nature, you can conduct test in safe way;
3.It has advanced and innovative control theory, it integrates three control systems of PLC, HMI and SOC in fine way. Control is correct by 100%, and you can experience the novel control feeling;
4.It utilizes most powerful and reliable PLC and special modules in the industry circle. 50 programs and 2500 steps are provided for user to make setting/storage and running;
5.It utilizes protection module for safe voltage, the withstand voltage can reach 500V. After energizing the equipment, the equipment will not be burned and it can protect the equipment by 100%.
6.It takes up high-sense FastAIT monitoring and refrigerating system imported and achieves effective control and management for refrigerant volume ;
7.It has automatic safety protection switch, which has high sensitivity, can detect any state, cut off protection and give alarm in shortest time and assure safety of the personnel and equipment;
8.It can separately raise temperature, reduce temperature, humidify and dehumidify, it utilizes unique BTHC flat constant temperature and humidity regulating mode;
9.Humidity range≥65％R.H, after installing the dehumidifying device;
11.It has air supply and circulating system, which can avoid dead angle of air flow in the chamber and improve the uniformity degree of product temperature and humidity.
■Control system:
PID programmable controller
Operating interface: LED display
Setting mode: touching type
Running mode: setting-up running and programmed running
Program: 100 groups in 1000 sections
Resolution: temperature: ± 0.1 ℃; humidity: ± 1%RH
Input: platinum thermal resistance
Control mode: PID control
Additional function: alarm and display function, power-off protection function, upper limit temperature alarm function, timing function (auto startup and auto stop), self-diagnosis function, curve record and display function, paperless record, USB data export, tele-monitoring and so on.
It can execute 100 STEP X 10 PATTEM mode.
Each section can be grouped and executed in crossing way.
The execution time for each section can be set up between 0-999H plus 59min.
For setting up for each group, it can circulate within 1-999 in part or entirely for option.
In execution, it can select group circle picture or section execution picture and can know the remaining time for execution.
It has power-off function. After power recovery, it can complete the remained test.
It can select single-section control or multi-section programmable control.
The screen has backlight time control function and it can adjust the backlight brightness.
For executing single-section control, it can change the execution value at will. The memory-type multi-function control has automatic control output functions, such as heating heater and humidifying heater for electromechanical solenoid valve for different groups of refrigerating compressors and so on.

Other supplier products

	Ozone climatic test chamber	This series is applicable for the aging cracking test of non-metal materials and rubber products. Model OC-100 OC-250 OC-500 OC-010 Workroom dime...
	Rain box test chamber	Область применения: Данная камера предназначена для испытаний внешней защиты при¬боров наружного освещения, сигнальных устройств и ламп наружн...
	Salt spray corrosion test chamber	This product series can simulate the marine climate and can be used to test the salt fog resistant performance of materials, products and their coa...
	UV weather test chamber	This series is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources. Model UV-260 Workr...
	Temperature & humidity test chamber	This product series is widely used in the temperature variation tests, cold resistance tests and storage with low-temperature in the fields of aero...

Same products

	Small waste incinerator. Beach garbage incineration	Seller: Hangzhou Fire Print Technology Co., Ltd.	Green waste incinerator can be customized: Content product: 5 cubic meters, 2 tons of garbage dis...
	Strong disinfection and sterilization equipment for classrooms	Seller: Hangzhou Fire Print Technology Co., Ltd.	Space disinfection equipment Strong disinfection and sterilization equipment for classrooms Power...
	Machining	Seller: Hebei Jinganruineng Environmental Science & Technology Co., Ltd	Machining Product description: Our company has a variety of large-scale machining equipment a...
	Enamelled Steel Plate	Seller: Hebei Jinganruineng Environmental Science & Technology Co., Ltd	Enamelled Steel Plate Product description: Enamel assembly tank is made of enamel steel pla...
	Gas Holder	Seller: Hebei Jinganruineng Environmental Science & Technology Co., Ltd	Gas Holder Product description: We take use of corrosion - resistant, high - strength membr...