Waste tire recycling line
The waste rubber tire granulator is used to crush the rubber that comes out of the steel wire separator, and the particle size after crushing can reach about 1 mm. Then through particle screening and circulation to achieve a finer size. Due to the special design of the pellet machine, high-quality pellets with consistent size can be produced, and 99% of the fibers are removed during the pellet manufacturing process.
Other supplier products
|
|
Lithium battery recycling equipment |
废旧锂离子电池的预处理工艺主要是在回收的废旧电池排出后，利用机械设备进行破碎、磁选、风选、破碎、重选、筛分等工序，使正极和正极上的粉末负极片材料与铜铝箔有效分离，将电池视为含有贵金属的材料。整套包括：撕碎机、锤式破碎机、皮带输送机、磁选机、细碎机、皮带输送机、振动分级筛、正负极细碎机、分析仪、... |
|
|
copper wire recycling line |
Waste wire recycling line is mainly used for all kinds of waste copper wires, separating copper wires into fine copper rice and PVC. This machine c... |
|
|
Scrap radiator recycling line |
This equipment is used to process various large radiators (copper and aluminum water tanks) or motor rotors (with shafts) less than or equal to 15c... |
|
|
metal shredder,double shaft shredder,shredder |
A metal shredder is a powerful machine that is designed to break down metal structures and materials into smaller, more manageable pieces. These ma... |
|
|
Waste Motor Stator Recycling Line |
The waste motor recycling line is mainly suitable for processing motor stators, wire packs and small transformers below 20cm. The manual pre-sorted... |
All supplier products
Same products
