Waste Refrigerator Recycling Line
The working process of the waste refrigerator recycling line is to transport the manually processed waste refrigerators to the shredder for primary crushing, and then enter the hammer crusher for secondary crushing. At the same time, part of the polyurethane foam separated by winnowing will enter the foam separator. The crushed plastic and metal materials go through magnetic separation and iron separation on the belt, and then enter the eddy current separation. Non-ferrous metals such as copper and aluminum are separated by eddy current, and plastics and foam materials are transported to the air separation system through belts to separate pure plastics and foams.
Other supplier products
|
|
Waste tire recycling line |
The waste rubber tire granulator is used to crush the rubber that comes out of the steel wire separator, and the particle size after crushing can r... |
|
|
Waste Refrigerator Recycling Line |
The working process of the waste refrigerator recycling line is to transport the manually processed waste refrigerators to the shredder for primary... |
|
|
Solar Panel Recycling Machine |
太阳能电池板的框架由拆框机移除。光伏面板上80%以上的玻璃被玻璃去除机去除。双轴撕碎机将光伏板撕成条状。接下来，物料将进入破碎机。破碎机将物料破碎成1-2cm的小块。通过负压进料，这些小块将进入细磨机。金属粉末从空气分离器的一侧筛出。塑料和少量金属进入静电分离器。我们整条生产线处于负压状态，配... |
|
|
Waste Motor Stator Recycling Line |
The waste motor recycling line is mainly suitable for processing motor stators, wire packs and small transformers below 20cm. The manual pre-sorted... |
|
|
Printed Circuit Board Recycling Line |
The circuit board recycling production line is mainly used for the separation of metal and non-metal in materials such as waste circuit boards, cop... |
All supplier products
Same products
