Scrap radiator recycling line
This equipment is used to process various large radiators (copper and aluminum water tanks) or motor rotors (with shafts) less than or equal to 15cm in size. The material is roughly crushed by the first crusher, and then crushed by the second crusher. The crushed material is 3cm in size, and the iron is separated by magnetic separation, and then air-separated by air. The equipment has novel structure, beautiful and unique appearance, and large production capacity; the whole line is controlled by PLC program, and one feeding can be completed by multiple machines; it is equipped with automatic shutdown and overload automatic alarm device. The successful development of this treatment line has greatly liberated productivity, improved the quality of metal recovery, and at the same time recovered the advantages of iron. The most important thing is to effectively solve the overflow of dust during the treatment process and reduce air pollution.
Other supplier products
|
Lithium battery recycling equipment |
废旧锂离子电池的预处理工艺主要是在回收的废旧电池排出后,利用机械设备进行破碎、磁选、风选、破碎、重选、筛分等工序,使正极和正极上的粉末负极片材料与铜铝箔有效分离,将电池视为含有贵金属的材料。整套包括:撕碎机、锤式破碎机、皮带输送机、磁选机、细碎机、皮带输送机、振动分级筛、正负极细碎机、分析仪、... |
|
Waste Motor Stator Recycling Line |
The waste motor recycling line is mainly suitable for processing motor stators, wire packs and small transformers below 20cm. The manual pre-sorted... |
|
Printed Circuit Board Recycling Line |
The circuit board recycling production line is mainly used for the separation of metal and non-metal in materials such as waste circuit boards, cop... |
|
Waste tire recycling line |
The waste rubber tire granulator is used to crush the rubber that comes out of the steel wire separator, and the particle size after crushing can r... |
|
Waste Refrigerator Recycling Line |
The working process of the waste refrigerator recycling line is to transport the manually processed waste refrigerators to the shredder for primary... |
All supplier products
Same products