PTFE Film
Polytetrafluoroethylene filmis made of PTFE resin by molding, sintering, cooling into blank, then by turning, calendering.
The ptfe thin filmmade by turning is a non-oriented film, which becomes a oriented film after calendering.
The non-oriented film is semi-oriented film by calendering 1.1-1.8 times.
Polytetrafluoroethylene Film Specification
|
Product name |
Classification |
Specification(mm) |
Remarks |
||
|
Thickness |
Width |
Length |
|||
|
The original color film |
Directional |
40-100 |
≥30000 |
||
|
Semi directional |
40-100 |
≥30000 |
|||
|
Non directional |
40-300 |
≥1000 |
|||
|
1200-1350 |
≥1000 |
||||
|
Color film |
Semi directional |
40-90 |
≥30000 |
Color: red orange yellow green purple brown black etc |
|
|
Non directional |
40-100 |
≥2000 |
|||
PTFE FilmTechnical Indexes
|
Project |
Company |
Technical indicators |
Remarks |
||||
|
SFM-1 |
SFM-2 |
SFM-3 |
|||||
|
Directional |
Directional |
Non directional |
Directional |
Non diractional |
|||
|
Tensile strength |
Mpa% |
≥30 |
≥20 |
≥10 |
≥30 |
≥10 |
SFM-1: As the capacitor dielectric |
|
The elongation at break |
≥30 |
≥60 |
≥100 |
≥30 |
≥100 |
||
|
1mhz Dielectric loss tangent value |
≦2.5x10 |
≦30x10 |
SFM-2: Used for the insulation of conductor |
||||
|
Average value 1.8-2.2 |
Average value 1.8-2.2 |
||||||
|
DC breakdown strength (room temperature) |
KV/mm |
Average value≥200 |
Average value≥600 |
Average value≥40 |
Average value ≥60 |
Average value ≥30 |
SFM-3: As the electrical meter insulation and sealing gaskets etc. |
|
Lowest value: 40 |
Lowest value: 6 |
Lowest value: 4 |
|||||
PTFE's excellent electrical insulation, high and low temperature resistance and not sticky, especially the dielectric properties of its impact is not affected by environment and frequency, develop its wide application in electronic and electrical appliances. As one of the leading ptfe film suppliers, our embryo is made of PTFE resin with quality high cleanliness. After the production process of truning and pressing the directional. It can be made into semi directional and oriented PTFE film, clean, smooth and excellent dielectric properties characteristics.
PTFE Film RollFeatures
Temperature resistance: It is able to work stably between -180°C to +260°C.
Excellent chemical corrosion resistance: Applicable medium includes oil, acid solution and almost all chemical materials.
Excellent non-sticky property: With low friction coefficient it easier to remove those resin, dopes, oil and other sticky things.
Anti-aging, weathering resistance.
Excellent insulation property.
Filled material: Filled PTFE has more outstanding performance by adding filler such as carbon, graphite, bronze, glass fiber, carbon fiber, MOS2, PEEK, PI, POB BaSO4, SiO2, glass bead, polyamide.
PTFE Film Uses
Electrical instrument gaskets used in various media.
Capacitor media.
Wire wrap insulation.
Can also be used as anticorrosive, high temperature resistant sealing or anti-friction materials.
Color film is a small section of high temperature resistance and easy to distinguish wire ideal insulation material.
PTFE products and UHMWPE plasticproducts have extensive applications across various plastic products industries, including chemical industry, medical field, food processing, electrical and electronics, aerospace, and more. Both PTFE products and UHMWPE products are used in the manufacturing of corrosion-resistant equipment, medical devices, seals, wear-resistant components, and sliding elements.
Send product request
Other supplier products
 |
PTFE Braided Packing | PTFE braided packingis a new type of sealing packing with desperse Teflon tape or tensile belt after the woven. The graphited PTFE packinghas excel... |
 |
PTFE Gasket | PTFE Gasket A pure ptfe gasketis a type of sealing component made from PTFE material, which is a synthetic fluoropolymer known for its excellent... |
 |
PTFE Slide Bearing Plate | PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease gr... |
 |
PTFE Machined Parts | PTFE machined partsare custom-made components manufactured from polytetrafluoroethylene material. These parts are created through machining process... |
 |
Glass Filled PTFE Products | Glass Filled PTFE Gaskets PTFE filled products by PTFE resin filler, after mixing, pressing and sintering after secondary processing. This product... |
Same products
|
|
PTFE Film | Seller: Jiangsu Xinrui Plastic Technology Co.,Ltd | Polytetrafluoroethylene filmis made of PTFE resin by molding, sintering, cooling into blank, then... |
 |
Types Of Plastic Injection Mold Polishing | Seller: Taizhou Huangyan Fow Mould CO., LTD | Types Of Plastic Injection Mold Polishing Introduction to the plastic injection mold polishing ... |
 |
Two Shot Molding | Seller: Taizhou Huangyan Fow Mould CO., LTD | Two shot moulding, also called double shot injection molding, double shot moulding, multi shot in... |
 |
PRECISION PLASTIC INJECTION MOLDS/TOOLS | Seller: Dongguan City Fangling Precision Mould Co., LTD. | When it comes to plastic injection mold parts, precise moulds and precision equipment are require... |
 |
Indoor Slippers | Seller: Good Seller Co., Ltd | After a tired day, your customers need comfortable indoor slippersto keep feet cozy around house.... |
