Building material combustion calorific value calorimeter
Building material combustion calorific value calorimeter Mainly used for the detection of stone, wood, concrete, evenly dispersed mineral wool and polymers and other building materials, the determination of calorific value of fuels, used in building research and technical supervision and other departments.
Standards compliant:
GB / T 14402-2007 "Combustion properties of building materials and articles - Determination of combustion calorific value"
Building materials burning calorific value tester / building materials burning calorific value detector
Main features:
1. This equipment is in the same kind of pre-product developed on the basis of a new type of analytical instruments;
2. Using high-end single-chip, large-screen LCD screen, the entire Chinese user interface;
3. Has a high precision measurement, small size, easy operation, automatic ignition, automatic water, water, mixing, calculation, printing and other characteristics;
4. It is one of the test methods to evaluate whether the combustion performance meets Grade A composite (sandwich) materials is used to determine the total calorific value and the net calorific value.
Building material combustion calorific value calorimeterTest principle:
Under standard conditions, a specific mass of the sample is placed in a constant volume of oxygen and nitrogen calorimeter, the test sample combustion calorific value of the equipment, under standard conditions, the test to test the temperature based on the consideration of all heatLoss, and latent heat of vaporization, calculate the combustion calorific value of the sample.
Building materials burning calorific value tester / building materials combustion calorific value detector Main parameters:
1. Measurement principle: Oxygen bomb heat method
2. Measurement time: (30-60) min
3. Temperature resolution: 0.001 ℃
4. Ignition method: short circuit ignition
5. Ignition time: 5s
6. Ignition voltage: DC12V
7. Outside the water tank capacity: about 40L
8. Internal water tank capacity: about 2.1L
9. Test environment: (23 ± 2) ℃ (per room temperature change should be ≤ 1 ℃) Relative humidity (40-60)% RH
Send product request
Other supplier products
 |
Qinsun UV-master | In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accel... |
 |
Automotive Wire Adhesion Tester | Standard Engineered to meet the rigorous demands of global automotive and adhesives industries, our Automotive Wire Adhesion Tester strictly adh... |
 |
Industrial water purifier | Applicable Standards Industrial water purifier systems adhere to global purity and safety benchmarks, including: ASTM D1193(Specifications fo... |
 |
Geomembrane thickness tester | Scope of application: Used to determine the thickness of smooth geomembrane and other plastic films under specified pressure and time. The sample ... |
 |
Fabric Down-Proof Impact Tester (Impact Method) | Introduction The first sample is made of bags which built a certain quality of the down. The sample bag is placed on the slope, and the impact nee... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
