Ergonomics and Human Thermal Response Measurement
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The Porton-man Thermal Manikin is suitable for a wide range of applications, including:
(1) Military Protective Clothing Testing: Evaluates the thermal, barrier, and comfort performance of CB protective suits, gloves, and boots.
(2) Chemical and Biological Defense Research: Tests the efficacy of garments and equipment against chemical and biological hazards.
(3) Product Development & Quality Control: Assesses new designs of protective clothing and materials under realistic motion and environmental conditions.
(4) Human Factors & Ergonomics: Studies the impact of movement, posture, and exertion on wearer comfort and mobility.
(5) Third-Party Laboratory Testing: Supports certification, regulatory compliance, and performance verification of protective equipment.
Standard
The instrument is designed and tested in compliance with the following international and national standards:
(1) KSF ISO 12949 – Protective clothing testing methods for chemical and biological agents
(2) ASTM E459-22 – Standard test method for thermal manikins
(3) ISO 12949-2011 – Protective clothing—Manikin-based evaluation
(4) ASTM E457-08 (2020) – Thermal manikin calibration and performance
(5) ASTM D6616-21 – Standard practice for testing full-body protective clothing
(6) BS 10/30207740 DC – UK military protective clothing standard
(7) ASTM E598-08 (2020) – Thermal manikin measurements
(8) ASTM D4683-25 – Evaluating barrier properties of protective fabrics
Technical Parameters
| Parameter | Specification |
|---|---|
| Type | Computer-controlled robotic manikin |
| Primary Function | Testing chemical and biological protective clothing and equipment |
| Movement Capabilities | Walk, travel, run, sit, kneel, climb stairs, raise arms |
| Travel Speed | 0.5 m/s – 1 m/s |
| Run/Sit Speed | 2 m/s – 3 m/s |
| Sensor Count | >100 sensors distributed throughout the body |
| Data Recording | Real-time recording during testing |
| Analysis Capability | Immediate processing and evaluation of collected data |
| Control | Computer-controlled with integrated drive frame |
| Dimensions | Customizable according to test configuration |
| Weight | Dependent on configuration |
Test Procedures
(1) Mount the Porton-man on the drive frame in the testing area.
(2) Configure motion parameters (walking, running, sitting, kneeling, stair climbing, arm movements).
(3) Connect the data acquisition system to monitor sensors.
(4) Start the test sequence via the control software.
(5) Perform the desired motion tasks while the manikin collects thermal, pressure, and barrier data.
(6) Analyze recorded data in real-time or post-test for performance evaluation.
(7) Repeat as necessary for different clothing sets or test conditions.
Maintenance Information
(1) Regularly inspect mechanical joints, actuators, and sensors for wear.
(2) Calibrate sensors and data acquisition modules according to manufacturer recommendations.
(3) Clean surfaces and mechanical components using non-corrosive agents.
(4) Avoid exposure to extreme temperatures or moisture that could damage electronics.
(5) Maintain logs of test sequences, calibration, and maintenance activities.
(6) Ensure software updates are applied to control and analysis systems for optimal performance.
Send product request
Other supplier products
 |
Safety Helmet Roll-off Testing Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a we... |
 |
Breathing simulator manikin | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 14296-2005 — Indoor Air Quality Evaluation Methods (Air Pollutant Exp... |
 |
Automatic voltage internal resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automatic Voltage & Internal Resistance Tester is a precision electrical testing in... |
 |
Advanced Gas Jet Erosion Rig for Surface Durability Testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Gas Jet Erosion Rig is a laboratory testing system designed to evaluate e... |
 |
Femoral Stem Neck Prostheses Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
