Fire Retardant Coatings Tester, ASTM E84 Tunnel Test Equipment
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Technical parameters
| Item | Description |
|---|---|
| Burner Top Diameter | 20mm |
| Burner Height | Approximately 200mm |
| Burner Blue Flame Temperature | (900±20)°C |
| Combustible Gas Source | Natural gas, liquefied petroleum gas, or city gas |
| Thermocouple | Armored thermocouple with precision of work grade, K type, outer diameter not greater than 3mm |
| Electronic Potentiometer | Error less than ±0.5% of the measured temperature |
| Ignition System | High voltage electronic ignition system |
Test Procedures
Equipment Composition: The tunnel method tester consists of a main control box and a combustion chamber. The combustion chamber is a tunnel furnace welded from a metal steel frame, equipped with natural ventilation ports, gas supply ports, and a graduated observation window. The control box is equipped with a digital display temperature control system, a gas flow rate adjustment device, and a combustion temperature recorder.
Test Conditions: The test uses a standard flame of 900±20℃. Temperature monitoring is achieved through thermocouples and an electronic potentiometer. Environmental conditions must meet the requirements of a temperature of 5–35℃ and a relative humidity of ≤85%.
Test Procedure: Under laboratory conditions, the flame propagation characteristics are tested using the tunnel method tester to evaluate the protective effect of the fire-retardant coating on the substrate and the quality of its flame propagation performance.
Results Analysis: Through quantitative analysis, the performance of the fire-retardant coating is evaluated, providing an objective basis for the use and selection of fire-retardant coatings.
The tunnel method test provides objective experimental evidence for the performance evaluation of fire-retardant coatings and is suitable for quantitatively testing the flame retardant performance of fire-retardant coatings applied to the surface of substrates under laboratory conditions.
Send product request
Other supplier products
 |
IV Set Pressure Leakage Testing Equipmen | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Infusion Set Positive Pressure Leakage Tester complies with the following me... |
 |
Automatic electronic roll testing apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The electric rolling wheel peeling testing machine has a wide range of applic... |
 |
High Velocity Impact Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main Purpose To test the impact - resistance performance of glasses, goggles and face shie... |
 |
Adjustable Catheter Friction Performance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YY/T 1536-2017:Catheters other than intravascular catheters — Standard tes... |
 |
Safety Helmet Flammability Tester，Safety Helmet Flame Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Safety hat flame retardant performance tester for safety hat flame r... |
