Sublimation Fastness Tester
Sublimation Fastness Testeris suitable for color fastness to hot pressing and dry heat test method test device fastness test method of resistance to dry heat color, fabric can be tested for color fastness, chlorine damage (resin finishing fabrics), cloth bleaching pan yellow test, disperse dyes sublimation color fastness test, reactive dye fastness test.
resistant ironing, or sublimation color fastness tester can test the fabric in hot, dry heat treatment of the dimensional stability;
Sublimation Fastness Testercan also test the fabric sublimation color fastness. Sample is placed between the upper and lower heating plate, the upper and lower heating plate temperature is accurately controlled by a separate controller, the heating plate spacing, the weight of the test piece controllable.
Test the temperature range of 120-230 ℃, with regular alarm function, accurate control of the sample time.
Technical Parameters
A, the hot plate for test: Size W100 × D40mm aluminum material (the same from top to bottom)
B, temperature regulation: digital temperature controller, the minimum display 1 ° C (upper and lower one)
C, the timing timer, audible alarm function
D, maximum temperature: 250 ° C
E, hot plate surface pressure: 4 ± 1 KPa (40cm2)
F, Heater: Cartridge Heaters 100V 150W (upper and lower one)
G, outside size: about W250 x D300 x H230mm
Other supplier products
|
|
Steam jet test chamber |
Technical parameters:
All parts of the steam jet test chamber in contact with the medium are rust-proof and can be operated with deionized water.
... |
|
|
Fiber thermal shrinkage tester |
Intelligent fiber heat shrinkable tester used to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, b... |
|
|
Activated carbon wear resistance tester |
Applicable standards:
GB/T 30202.3-2013: This is the wear resistance test standard in the test method of coal-based granular activated carbon for ... |
|
|
Fabric Friction Charging Tester |
TheFabric Friction Charging Testeris composed of a friction device and a potential measuring device, which is used to test the electrostatic charac... |
|
|
Bacterial Filter Tester G299 |
G299/ Bacterial filtration tester is suitable for medical surgical masks: it is used to cover the mouth, nose and mandible of the user to prevent m... |
All supplier products
Same products
