Battery impact tester
The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in）
diameter rod placed in a cross position over the center of the sample. A 9.1kg or
10kg weight is dropped from a certain height （610mm or 1000mm） onto the
sample. cylinder
When the battery is subjected to impact test, its vertical axis should be parallel
to the plane and perpendicular to the vertical axis of the steel column. The most
axis of the square battery is perpendicular to the steel column, and the largest surface
is perpendicular to the impact direction. Each battery receives only one impact test.
The battery does not catch fire or explode.
Meet the standard
GBIT31485-2015 "Safety requirements and test methods of power Batteries for
Electric Vehicles"
GB/T31241-2022 "Safety requirements for lithium-ion batteries and battery packs
for portable electronic products.
UN383 United Nations Manual of Tests and Standards for the Transport of
Dangerous Goods
IEC62133 "Safety requirements for batteries （groups） composed of cells and for
use in portable equipment"
UL1642-2012 "Inner Battery Standard"
Main parameter
Inner box size :550x550x1440mm（W x D x H）
Equipment dimensions :660x900x1720mm（W x D x H）
Material :SUS201 stainless steel plate, thickness 1.2mm and coated with Teflon
Outer box material: 1.5mm thick cold rolled steel plate paint treatment
Observation window: 250x250mm tempered glass, transparent window with
stainless steel mesh.
Lighting device: The machine is equipped with a light inside to facilitate the
observation of the state of the tested sample.
Smoke outlet: 100mm in diameter, located at the rear of the box.
Pressure relief port: The opening size is 200x200mm, located at the back of the
box. When the sample is exploded, the pressure relief port will pop open and remove
the pressure.
Door: single door open left, door equipped with safety limit switch, side equipped
with explosion-proof chain to ensure the safety of personnel.
Ball weight: 9.1kg, 10kg, 0.1kg
Impact height :0-1000mm, commonly used test height 610 —— 25mm
Control mode: touch screen control
Displacement accuracy: 5mm soil
Impact mode: lift the falling ball to a certain height and release it. The falling
ball falls freely in the vertical direction without tilting or shaking.
Metal rod: Diameter 15.8±0.2mm steel rod
Maximum battery size :200x200x200mm
Impact surface :45# steel paint treatment, thickness 15mm
Equipment weight :270kg
Power supply :AC220V
Power :600W
Send product request
Other supplier products
 |
Textile Point-to-Point Resistivity Tester | Product Performance It is an essential instrument for the "Special Labor Protective Equipment Safety Certification" (LA Certification) and the "Sp... |
 |
Rapid screening Calorimeter | Product Introduction： The rapid - screening calorimeter is a professional calorimetric instrument for the quick assessment of reaction thermal haz... |
 |
Anti-drilling and Lint Tester (Impact Method) | Scope of application: The impact method is used to determine the anti-drilling performance of fabrics, which is suitable for testing various down ... |
 |
Goggles Puncture Resistance Testing Machine | Applicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain weight of sharp objects fall from the height specified in ... |
 |
Total Hip Joint Prostheses Wear Tester | Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and enviro... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
