Safety shoe voltage tester
Product Introduction:
The safety shoe voltage resistance tester is mainly used to test the voltage resistance of safety shoes under specified conditions, including the measurement of ground voltage, voltage resistance time and other parameters. Through the test of the equipment, the electrical insulation performance of the safety shoes can be effectively evaluated, so as to judge whether it meets the requirements of national standards. This is of great significance to the protection of workers' personal safety.
Meet the standard:
GB12011, ISO 8782-1, GB20991-2007, IS2.344:2004, ANSI-241 and CSA-Z195
Technical parameters:
Control system: PLC （Programmable logic controller） is usually used to realize automatic control and test process.
Input voltage: generally AC220V, in line with the requirements of conventional power supply.
Output voltage: can be customized according to test requirements, common output voltage including AC6KV, AC20KV, AC30KV and so on.
Capacity: Generally 0.5KVA, to ensure stable operation of the equipment during the test.
Test frequency/time: The test frequency is usually 60Hz, and the test time is generally 1 minute or set according to standard requirements.
Touch screen: 7-inch color touch screen, support English and Chinese switching, easy to operate and view the test results.
Send product request
Other supplier products
 |
Needle Flame Tester | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
 |
Spray Aerosol Ignition Distance Tester | Product Description Conforms to UN Recommendations on the Transportation of Dangerous Goods - Manual of Tests and Criteria 31.4 Ignition Distance ... |
 |
Bone Plates Static Four - point Bending Tester | Standard YY/T 0342-2022: Chinese standard specifying methods for determining bending strength and equivalent bending stiffness of straight and pre... |
 |
Battery Isothermal Calorimeter | Product Description Battery Isothermal Calorimeter is a professional instrument developed based on the principle of power compensation isothermal ... |
 |
Carbon Black Content Tester | Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. GB/T 2951.41-2008: Test method for carbon black and ash ... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
