Automatic Down Filling Tester

• 

Introduction to the Automatic Down Filling Tester

The loftiness index is one of the important indicators of feather and down quality. It is a concentrated manifestation of the internal quality in terms of elasticity and thermal insulation performance.

At the same time, it also indirectly reflects the degree of dispersion of the various components of feathers and down. Loftiness testing is an important part of down testing.

It refers to the elasticity of down (feathers), which is obtained by measuring the volume occupied by a certain amount of sample down (feathers) under a constant weight pressure in a container with a certain caliber. Since the greater the loftiness, the greater the amount of static air contained, and the static air layer is a good thermal insulation layer, there is a good linear relationship between the loftiness of down and the thermal insulation performance of down products.

Technical Parameters of the Automatic Down Filling Tester

• Control System: PLC
• Operating Interface: Color 7-inch touch screen, with Chinese and English switching
• Measuring Cylinder:
• Diameter (large cylinder): 288 mm; (small cylinder): 244 mm
• Cylinder Height: 500 mm
• Cylinder Material: Acrylic
• Sample Filling Amount: CEN 20 g; DIN EN 12130 20 g; USA 30 g; JIS 30 g
• Weight Disc:
• Material: PMMA
• Inner diameter (large cylinder): 284 mm; (small cylinder): 239 mm
• Load Weight: European and American standards (*** & ASTM) 94.5 g; Japanese standard (JIS) 120 g
• Pressure:
• European and American standards (*** & ASTM): 0.14878 g/cm³
• Japanese standard (JIS): 0.188 g/cm³
• Air Volume for Fluffing the Sample: 30 L
• Hanging Rod of the Pressing Disc: Soft
• Descending Speed When the Test Program Encounters Down Feathers: Less than 0.3 m/min
• Overall Dimensions: 760 * 480 * 1480 mm
• Total Weight of the Machine: 69 kg

Standards Applicable to the Automatic Down Filling Tester

IDFB－FP, BSEN12130, GB/T10288, FZ/T80001, GB/T14272, GB/T12705.2, FTMS191A, JISL 1903, etc.

Other supplier products

	KES - FB2 - SH Single - Strand Bending Tester	Content The Single Fiber Bending Tester makes it possible to easily measure and quantify softness, elasticity, and diffusion differences in a si...
	Automatic voltage internal resistance tester	Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instrument...
	GMA Ultra-filtration Membrane Porometers	Standards: ASTM F316-2003, ASTM D6767-2002, ASTM E1294-1999, ISO 4003-1990, GB/T 14041.1-2007, HY/T 051-1999, HY/T 064-2002 Applications: ...
	Leather Permeability Tester	Leather Permeability Tester - Leather and Footwear - standard Standards: GB/T 5453 Textiles - Determination of the permeability of fabrics to a...
	Mask Flame Flammability Tester	introduction: The flame-retardant tester of medical mask is used to test the flame-retardant performance of the mask when it is accidentally conta...

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...