Contact heat resistance tester

• 

A Contact Heat Resistance Tester is a specialized laboratory instrument designed to measure a material's ability to resist and protect against heat transfer through direct contact.

This tester works by applying a heated surface at a controlled temperature and pressure to a material specimen. It then measures the amount of time it takes for the temperature on the material's opposite (unexposed) side to reach a specified threshold, or the temperature increase after a set duration. This provides critical data for evaluating the thermal protective performance of materials used in gloves, protective clothing, and other applications where direct contact with hot objects or surfaces is a risk. It's essential for ensuring safety and compliance with relevant industry standards.

Compliance Standards:

EN 702, EN 12477, EN 407, ISO 12127

Scope of Application:

Suitable for testing thermal protection performance of firefighter suits, heat-resistant gloves, and related materials.

Product Details:

The contact heat resistance tester evaluates materials' ability to withstand high-temperature contact heat by measuring the time required for specimen temperature to rise 10°C under specified pressure and heating conditions. This critical time determination provides quantitative assessment for thermal protection material development and performance evaluation.

Technical Specifications:

1. High-temperature heating element (Φ25.2mm) with:
　　a. Sensitive thermocouple sensor
　　b. Temperature settable from room temperature to 500°C
2. Insulated heating element coating to prevent heat dissipation interference
3. 49N contact force provided by weighted pressure plate
4. Alumina-anodized temperature probe (Φ25mm, 5mm) with ±0.1°C accuracy

5. Motorized sample holder system:
　　a. 5mm/s precise motion control
　　b. Contact heating body at controlled speed
6. One-touch testing with LED display showing:
　　a. Initial specimen temperature
　　b. Real-time temperature
　　c. Critical 10°C rise time (±0.1s resolution)
7. Dimensions: 800×50×550mm (W×D×H)
8. Power requirement: 230V 50Hz AC

Другие товары поставщика

	In situ multi-channel storage gas production test system	Standard UL 1642: Standard for Lithium Batteries IEC 62133-2: Secondary Cells and Batteries Containing Alkaline or Non-Acid Electrolytes UN 38.3...
	Pipe coating scratch tester	Product Introduction: Paint and varnish scratch resistance tester, also known as scratch resistance tester or balanced scratch rod adhesion resist...
	Testing Equipment for Designated Protection Areas of Helmets	Testing Equipment for Designated Protection Areas of Helmets - Other test instrument - standard Standards: GB 811 - 2010, etc. Application...
	Dry and wet state reverse reflection coefficient tester	Product Information: Dry and wet state reverse reflection coefficient tester is used to simulate the evaluation of the reflective performance of...
	Photovoltaic module wire tube bending testing machine/ Solar PV Module Conduit Bending Tester/ Solar Panel Bend Testing System	Standard IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing CE Certification(Conformité Eu...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...