Shoe Shank Stiffness Tester

This machine evaluates the thermal insulation and moisture permeability performance of the entire shoe by measuring its heat retention, moisture absorption, and breathability, and tests it together with long socks.

The test takes into account the effects of the sole, upper, and lining, as well as the influence of stitching and various types of socks.

Application

1. Footwear Manufacturers: Optimize the combination of upper/sole materials (e.g., mesh fabric, breathable leather, thermal insulation cotton) during the R&D phase, and conduct random inspections of product breathability/thermal insulation consistency during the production process;

2. Outdoor/Functional Footwear Sector: Test the breathability and moisture-wicking capabilities of athletic shoes, hiking boots, and safety shoes, or the thermal insulation performance of snow boots and cold-weather boots, to match the demands of outdoor scenarios;

3. Quality Inspection and Compliance: Conduct breathability/thermal insulation performance testing of footwear products according to standards such as GB/T 3903.14 and ISO 20344 to ensure that products comply with industry standards;

4. Brand Quality Control: Verify the authenticity of the breathability/thermal insulation indicators advertised for products to enhance product competitiveness in the market.

Standards

SATRA TM256: Flexural and torsional stiffness testing for athletic, safety, and casual footwear.

SATRA TM194: Dynamic fatigue resistance evaluation for shoe midsole and outsole integrity.

Feature

Dynamic Testing System:

Servo-electric actuator with 0–50° programmable flex range.

360° torsion axis with ±180° rotational limits.

Precision Fixturing:

Quick-change shoe clamps for US Men’s 5–15 (EU 38–50) sizes.

Adjustable torsion line alignment for varied shoe geometries.

Sensor Suite:

1.000 N load cell for flexural force measurement.

50 N·m torque sensor with overload protection.

Software Bundle:

ShoeFlex Pro™: Automated stiffness coefficient calculation (ASTM D790 equivalent).

Fatigue Analyzer: Predicts lifespan via stress-cycle (S-N) curve modeling.

Safety Systems:

Emergency stop with E-Stop loop monitoring.

Over-torque shutdown at 110% of rated capacity.

Parameters

Specification	Details
Flex Angle Range	0° to 50° (adjustable in 1° increments)
Torsion Range	±180° (360° continuous rotation)
Test Speed	30 cycles/minute (1–60 Hz adjustable)
Load Capacity	1.000 N (flex)
Angular Accuracy	±0.1° (±0.05° with calibration kit)
Power Supply	220V/50Hz (110V/60Hz available)
Dimensions (W×D×H)	600mm × 500mm × 1.100mm
Weight	95 kg (net)

Accessoriess

Standard Kit:

5 × Universal shoe clamps (adjustable width).

USB data cable and PC software license.

Advanced Analytics:

Fatigue Predictor: AI-driven lifespan estimation module.

CloudLink: Remote monitoring for global teams.

Calibration Services:

Annual recalibration with NIST-traceable certificate.

Safety Upgrades:

Explosion-proof enclosure for solvent-resistant testing.

HEPA filtration for particle-sensitive labs.

Consumables:

20 × Disposable sample alignment markers.

1L Silicone lubricant for high-cycle testing.

Test Procedures

1. Pre-test Preparation

Check that the instrument's cooling/heating system and temperature monitoring probes are functioning correctly. Pre-cool/pre-heat the test chamber to the set temperature (e.g., -10℃, 0℃), calibrate the temperature sensors, and ensure uniform temperature distribution within the chamber.

2. Sample Preparation and Installation

Place the shoes in a room temperature environment for 2 hours to equilibrate. Record the shoe material characteristics (e.g., thickness of insulation cotton, upper material). Insert the temperature sensor simulating a foot into the shoe, fix the shoe in the designated position in the test chamber, ensuring the sensor is in close contact with the inside of the shoe.

3. Parameter Settings

Select the "Insulation Test Mode," set the chamber ambient temperature (e.g., -15℃~5℃, adjust according to test requirements), test duration (e.g., 2 hours), and temperature acquisition interval. Save the parameters.

4. Starting the Test

Close the chamber door. The instrument maintains the set ambient temperature, continuously monitors the temperature change of the simulated foot inside the shoe, and records the temperature decay curve.

5. Test Monitoring

During operation, observe the temperature stability inside the chamber and record whether the temperature inside the shoe remains within the acceptable range (e.g., ≥10℃), preventing temperature fluctuations caused by equipment malfunction.

6. Test Completion and Cleaning

After the test is completed, the instrument automatically shuts down. After the chamber temperature returns to room temperature, remove the shoes, record the insulation performance data (e.g., temperature decay rate, lowest maintained temperature), clean the test chamber and sensors, turn off the power, and prepare the test report.

Other supplier products

	Thrust Bearing Rolling Friction and Wear Testing Machine	Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under contro...
	Intramedullary Nails Internal-fixation Pull-out Force Tester	Standard ASTM F543: Standard specification for metallic medical bone screws (dynamic loading protocols). ISO 12172: Implants for surgery—Pa...
	Urinary Catheter Strength Tester	The Urinary Catheter Strength Tester is designed to evaluate the physical strength and mechanical properties of urinary catheters. It provides accu...
	Cork Puncture and Chip Detection Instrument	The rubber stopper puncture debris detector is a device specifically used to detect the number of debris generated during the puncture process and ...
	Resistance Tester for Molten Metal Droplet (Splash) Impact Performance	Performance and Standards: This resistance tester for molten metal droplet (splash) impact performance is developed in accordance with testing sta...

All supplier products

Same products

	Gas Oxidizing Property Tester	Seller: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Seller: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Seller: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Seller: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...