Automotive Interior Materials Droplet Characteristics Tester
Automotive Interior Materials Droplet Characteristics Tester - Automotive Interior - standard
Standards:
1. 1995L0028-EN-01.01.2007-002.001-25 ( ANNEX V) Measurement method of melting properties. 2. NF P92-505 Dripping test with electrical radiator, used for melting materials. 3. EU 95/28/EC European parliament and of the council of 24 October 1995 relating to the burning behavior of materials used in the interior construction of certain categories of motor vehicle.
Applications:
It’s used to evaluate the melt dripping and burning performance for hot melt materials under the main heat source.
Product Information:
Introduction
Automotive interior materials droplet characteristics tester determine the materials’ droplet properties according to ECE R118 Appendix 7. This mechanical and electrical control tester is suitable for measuring the melting state of automotive interior materials in the specified radiation heat radiation.
Technical Parameter
Technical Parameter
| Items | Parameters |
| Power output of radiation heat source | 500W |
| Radiating surface of radiation heat source | Transparent glass plate, Φ (100 ± 5) mm |
| Sample support: | Φ118mm stainless steel ring with φ0.70mm, 2.10mm mesh stainless steel mesh in it. |
| residue container | Inner diameter 118mm, depth 12mm |
| Sample size | 70×70(mm), The thickness is no more than 13 mm |
| Distancefrom residue container to the sample rack | 300mm |
| The range of heat flux meter | 10W/cm2 |
| working power supply | AC220V, 50Hz, ≤1000W |
| The distance from the surface of the specimen to the surface of the radiation source | 30mm |
| Dimension | (Wide) 1120mm×(Depth)520mm×(Height)1250mm, vent hole Φ 100mm |
Send product request
Other supplier products
 |
Medical Mask Differential Pressure Tester | Standards: YY 0469-2011 YY/T0969-2013 EN 14683:2014 Annex C ASTM F2100 Applications: Medical Mask Differential Pressure Tester also called... |
 |
Puncture Resistance Testing Machine for Goggles | Standards: ECE R22.05, EN1077 Applications: Make a sharp - edged object of a certain weight fall from a height specified in the standard a... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact a... |
 |
Lamp Anti-aging Test Chamber | Lamp Anti-aging Test Chamber - Lighting and Color Assessment - standard Standards: Applications: ApplicationThe machine is used to test ... |
 |
Protective Clothing Resistance Tester | Scope of Application: This machine is used for the point-to-point resistivity test of anti-static work clothes and anti-static fabrics, complying ... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
