.

D50: hall effect high linearity 0.1% 1000A AC/DC current clamp

The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insulated BNC output cable that can accurately measure AC or DC current waveforms. FEATURES Holding wire diameter: φ52mm; Conforms to EN 61010, 600V CAT III; Low phase shift for power measurement; Frequency response from DC to 200 KHz; Improved ergonomic design & easy operation; Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters; Basic parameters : Ratio:1000: 1 or 2000:1 (customized) Accuracy class:0.2%, 0.5%, 1%, 2% Primary current:0 - 500A or 0-1000A AC/DC Max. Cont. Input current:1200A AC/DC Frequency range:10Hz-1MHz Weight (g):650 Protection:IP40 Max. jaw opening (mm):52



Send product request

To: 782364
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

GF302D THREE-PHASE ENERGY METER TEST EQUIPMENT
GF302D THREE-PHASE ENERGY METER TEST EQUIPMENT The product GF302D is a portable three-phase kWH meter test equipment,which are mainly used to test the error of single-phase or three-phase energy...
P110: 1000A cable fault analysis clamp current transformer
P110: 1000A cable fault analysis clamp current transformer The P110 clamp current transformer is a high performance AC Clamp current probe. It is well suited for power quality applications where high accura...
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insulated BNC output cable that can accurately measure...
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR DESCRIPTIONThe GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected with PC to control, become automatic verification s...
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power me...
All supplier products

Same products

D50: hall effect high linearity 0.1% 1000A AC/DC current clamp
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp Seller: 782364 The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insu...
D20: voltage output 200A AC/DC CURRENT PROBE
D20: voltage output 200A AC/DC CURRENT PROBE Seller: 782364 The Model D20 AC/DC current clamp is a portable 100A/200Arms current probe.The D20 is power by a ...
FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator
FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator Seller: 782364 The FQ-RCTA02 rogowski coil flexible current sensor is designed for easy installed in tight space...
FQ-RCT02:6000A flexible ROGOWSK coil current sensor
FQ-RCT02:6000A flexible ROGOWSK coil current sensor Seller: 782364 The FQ-RCT02 flexible current sensor is an AC current sensor composed of a flexible Rogowski coil...
Q150: split core 150mm 3000/5A current transformer clamp
Q150: split core 150mm 3000/5A current transformer clamp Seller: 782364 The model Q150 current transformer clamp can be used in large current situation and cooperate to ...