Computer controlled memory impact testing machine

Product Introduction:

Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics, cast stone, electrical insulation materials and other non-metallic materials impact toughness determination. The testing machine is an ideal test equipment for chemical industry, scientific research units, colleges and universities, quality testing departments, professional manufacturers laboratories and other units. It is a testing instrument with simple structure, convenient operation and accurate and reliable data.

Meet the criteria:

1.JB/T 8762-1998 "Plastic Simply supported beam Impact Testing Machine"

2.JJG145-2007 "Verification Regulations of Pendulum Impact Testing Machine"

3.GB3808 "Test of pendulum impact Testing Machine"

Applicable standards:

1.GB/T 1043.1-2008 "Rigid plastic simple support beam impact test method"

2.ISO 179-1993(E) "Plastics - Determination of impact strength of simply supported beams"

Technical indicators:

1. Impact energy: 2J/4J(simply supported beam); 2.75/5.5J(cantilever)

2. Sampling rate: 10us

3. Resolution: 16 bits

4. Load measurement accuracy: ≤1%

5. Impact knife Angle: 30°

6. Pendulum torque: simple beam 2.1436N.m, 1.0718N.m, 0.5359N.m

7. Cantilever beam 2.9474N.m, 1.4737N.m

8. Pendulum prelift Angle: 150°

9. Simple support beam:

1) Impact speed: 2.9m/s

2) The distance from the center of the pendulum shaft to the center of the sample: 230mm

3) Blade Angle: 30°

4) Blade radius: 2mm

5) Support corner radius: 1mm

6) Front Angle of support: 5°

7) Rear Angle of support: 10°

8) Support span: 40. 60. 70mm

9) Sample type and size (length × width × thickness)mm3:80×10×4mm, 50×6×4mm, 120×15×10mm

10. Cantilever beam:

1) Impact speed: 3.5m/s

2) The distance from the center of the pendulum axis to the center of the sample: 335mm

3) Blade Angle: 75°

4) Blade radius: 0.8mm

5) Front edge Angle: 5°

6) Blade back Angle: 10°

7) Sample type and size (length × width × thickness)mm3:

80×10×4mm

63.5 * 12.7 * 12.7 mm

63.5 * 12.7 * 6.4 mm

63.5 * 12.7 * 3.2 mm

Other supplier products

	Gas Hazard Characteristics Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Gas Hazard Characteristics Tester is a device used to determine the flammable ...
	Incline Impact Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Incline Impact Tester is designed to evaluate the impact resistance of product...
	Internal and external filters	Applicable Standards Both filter types adhere to industry-specific regulations, including: ISO 10526(Standard illuminants for colorimetry, e....
	Dry Friction and Wear Tribometer (Value Engineered Tribometer)	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Dry Friction and Wear Tribometer is a value-engineered, multi-functional testi...
	Geosynthetics Bursting Strength Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The geotechnical synthetic material comprehensive testing instrument is used for t...

All supplier products

Same products

	Bottle Wall and Bottom Thickness Tester	Seller: Standard International Group (HK) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Seller: Standard International Group (HK) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Seller: Standard International Group (HK) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Seller: Standard International Group (HK) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Seller: Standard International Group (HK) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...