Spray Rating Tester
Testing Standards: ISO 4920, BS EN 24920, BS 3702, GB/T 4745, AATCC 22, M&S P23, NEXT 23 Applications: Spray Rating Tester is used to determine the surface wetting resistance of fabrics. Product Information: The Spray Tester comprises a metal framework allowing distilled water to be sprayed through a nozzle onto a test specimen at 45° and 150mm below. The appearance of the specimen is compared against an optional photographic scale to rate. Instrument features: 1. The instrument structure is simple, mainly by the main frame, funnel, nozzle, sample holder and sample holder; 2. Nozzle have a total of 19 aperture evenly distributed, the aperture required by the standard custom. 250ml of water poured into the funnel can flow out of the nozzle within 25-30s; 3. The racks on the upper edge of the racks are at a 45 ° angle to the horizontal; 4. The center of the upper edge of the sample holder ring, ie the distance from the center of the sample to the nozzle, is 150 mm. Technical Parameters: 1. Structure: stainless steel; 2. Surface treatment: painting; 3. Dimensions: 230 × 250 × 500mm (length × width × height); 4. Weight: 5kg (11lb).
Other supplier products
|
|
" Helmet Anti - detachment Testing Machine" |
Purpose
Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain heigh... |
|
|
Timken Test Machine |
Testing Standards
ASTM D 2509
ASTM D 2782
GB/T3142
SH/T0204
Applicable standards
Timken extreme pressure friction testing machines are usuall... |
|
|
Glove cutting resistance tester |
Product Introduction:
The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure... |
|
|
Konan Tester |
Product Description
Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.5.1 Test 1(b): Kernan... |
|
|
Bone Plates Four-point Bending Fatigue Tester |
Standard
YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million ... |
All supplier products
Same products
