Spray Rating Tester
Testing Standards: ISO 4920, BS EN 24920, BS 3702, GB/T 4745, AATCC 22, M&S P23, NEXT 23 Applications: Spray Rating Tester is used to determine the surface wetting resistance of fabrics. Product Information: The Spray Tester comprises a metal framework allowing distilled water to be sprayed through a nozzle onto a test specimen at 45° and 150mm below. The appearance of the specimen is compared against an optional photographic scale to rate. Instrument features: 1. The instrument structure is simple, mainly by the main frame, funnel, nozzle, sample holder and sample holder; 2. Nozzle have a total of 19 aperture evenly distributed, the aperture required by the standard custom. 250ml of water poured into the funnel can flow out of the nozzle within 25-30s; 3. The racks on the upper edge of the racks are at a 45 ° angle to the horizontal; 4. The center of the upper edge of the sample holder ring, ie the distance from the center of the sample to the nozzle, is 150 mm. Technical Parameters: 1. Structure: stainless steel; 2. Surface treatment: painting; 3. Dimensions: 230 × 250 × 500mm (length × width × height); 4. Weight: 5kg (11lb).
在线联系供应商
Other supplier products
 |
Random Tumble Pilling Tester | G227T Random Tumble Pilling Tester-Two-box and four-box can be configured. It is mainly used in evaluating the pilling performance of textiles. The... |
 |
Safety Helmet Roll-off Testing Equipment | Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain heigh... |
 |
Dental Implants Fatigue Tester | Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure... |
 |
Car seat belt locking performance tester | Applicable standards: Automotive seat belt locking performance tester mainly meets the following national or industry standards: GB 14166-2013Sea... |
 |
Absorbable Bone - connecting Plates Four - point Bending Tester | Standard ASTM F2119: Standard test method for constant load testing of bioabsorbable screws and washers, applicable to bending performance evalu... |
Same products
 |
Liquid Sliding Penetration Comprehensive Performance Tester | 卖方: 上海千实精密仪器 | G373 Liquid penetrating and strike-through comprehensive performance tester - Penetrability test ... |
 |
Nonwovens liquid loss tester | 卖方: 上海千实精密仪器 | Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric mate... |
 |
Elmendorf Tearing Strength Tester | 卖方: 上海千实精密仪器 | G008 Manual Tearing Tester - Material Tear Resistance Test G008Manual Tearing Tester, The Elmend... |
 |
Dry Cleaning & Washing Cylinder | 卖方: 上海千实精密仪器 | IntroductionThe dry cleaning and washing cylinder consists of a stainless steel rotary test chamb... |
 |
Rotary Rubbing Color Fastness Tester (Crockmeter) | 卖方: 上海千实精密仪器 | Standard AATCC 116: Colorfastness to Crocking (American Association of Textile Chemists and Co... |
