Nonwovens liquid loss tester
Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance.
Standards compliant:
Edana152.0-99; ISO9073-11
The main purpose:
Non-woven fabric liquid loss tester _ liquid slip and loss of the tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance.
The main parameters ：
1, flow control range: 6.10mL / s ~ 6.41 mL / s;
2, slip and drain Taiwan angle control: 25 °;
3, slip and loss length: 250 ± 0.2mm;
4, timing: 60s, accuracy: ± 0.1s;
5, slip and loss Weight: 30g ± 0.01g.
Main features of thefabric liquid loss tester:
1, with the requirements of the requirements of the loss of Taiwan and sample fixture;
2, having a dose device capable of giving a 25 mL test solution in a continuous stream within (4 ± 0.1) s;
3, the test liquid out of time manual operation, automatic recording, digital display;
4, can be equipped with loss of weighing system.
Test principle:
A standard absorbent medium is placed under the nonwoven fabric to be measured and the combined sample is placed on a sloping pad to measure that when a particular amount of artificial urine flows down to the combined sample, the liquid penetrates the nonwoven Standard Absorbent Media Absorption, the liquid loss performance of the nonwovens sample was obtained by weighing the weight of the mass of the media prior to testing.
Другие товары поставщика
|
|
Wire Torsion Tester |
Applicable standards:
GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method"
GB/T 239.2-2012 "Metal materials wire Part... |
|
|
Fiber Crimp Elasticity Tester |
Product Introduction:
YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber.
Crimp elasticity, crimp recovery rate index... |
|
|
Carpet Flammability Tester |
Standard
BS 4790: Hot Metal Nut Method for Floor Covering Fabrics
ISO 6925: Ambient Temperature Tablet Test for Floor Coverings
BS 6307: Fire Te... |
|
|
SBI Single Burning Item |
Introduction
Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions.... |
|
|
Automatic freezing point pour point cold tester |
Product Introduction:
The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
Все товары поставщика
Похожие товары
