Constant Acceleration Tester (Arm Type)
KRD31 series constant acceleration tester are used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7.
It is most suitable for testing electronic components or devices. Under high g effect on microcircuits, to check adaptability and reliability of wiring and the internal structures. It may expose mechanical and structural defects that are not found with vibration and shock tests.
Technical Specifications
|
Model Parameters |
KRD 31－30 |
KRD 31－50 |
KRD 31－100 |
KRD 31－100A |
KRD 31－200 |
KRD 31－500 |
KRD 31－1000 |
KRD 31－1500 |
|
(kg) / Position |
30×2 |
50×2 |
100×2 |
200×2 |
500×2 |
1000×2 |
1500×2 |
|
|
Installation Platform Size (mm) |
500×500 |
600×600 |
700×700 |
800×800 |
1000×1000 |
1200×1200 |
1500×1500 |
|
|
Acceleration (g) |
3～100 | 3～50 | ||||||
|
Acceleration Accuracy (%) |
≤±3 |
|||||||
|
Specimen Installed Radius (mm) |
1000 |
1200 |
1650 |
2150 |
2600 |
3000 |
5400 |
6250 |
|
Max Turning Diameter (mm) |
2500 |
3000 |
4000 |
5000 |
6000 |
7000 |
12000 |
14000 |
|
Launch/Stop Time (Min) |
≤3 |
≤5 |
≤8 |
≤10 |
||||
|
Continues Working Time(min) |
60 |
30 |
||||||
|
Inner Diameter of Foundation (mm) |
Φ3000 |
Φ3500 |
Φ4500 |
Φ5500 |
Φ7000 |
Φ8500 |
Φ14000 |
Φ16000 |
|
Collector Ring |
Optional according to user requirements |
|||||||
|
Weight (kg) |
2500 |
4000 |
5000 |
5500 |
7000 |
8000 |
10000 |
12000 |
|
Power Supply |
AC 380V±10％ 30KVA |
AC 380V±10％ 45KVA |
AC 380V±10％ 60KVA |
AC380V±10％ 75KVA |
AC380V±10％ 110KVA |
AC380V±10％ 150KVA |
AC380V±10％ 500KVA |
AC380V±10％ 800KVA |
|
Control Mode |
Fully closed-loop digital network (remote) automatic control + manual control |
|||||||
|
Remarks |
Collector ring and control accuracy can be configured in accordance with relevant standards or user requirements. |
|||||||
|
Working Environment |
Temperature range 0～40℃, humidity ≤80%（no condense) |
|||||||
|
Standards |
MIL-STD-810F IEC68-2-7 |
|||||||
Send product request
Other supplier products
 |
KRD12 Pneumatic Horizontal Shock Test System | The KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the r... |
 |
Pneumatic Vertical Shock/Bump Test System | KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operatio... |
 |
KRD10 Hydraulic Vertical Shock Test System | KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to eva... |
 |
Pneumatic Bidirectional Vertical Shock Testing Machine | KRD17 series pneumatic bidirectional vertical shock test system is the new designed and developed for some large specimens that cannot or are not e... |
 |
6-DOF(degree of freedom) Simulation Test Machine | KRD61 series 6-DOF simulation table is a closed-loop servo simulation platform consisting of six servo actuators and six sets of dedicated hinges c... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
